--- a
+++ b/Makefile.in
@@ -0,0 +1,1004 @@
+# Makefile.in generated by automake 1.12.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(dist_man_MANS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/itpp-config.in $(srcdir)/itpp.pc.in \
+	$(srcdir)/itpp_debug.pc.in $(top_srcdir)/Makefile.common \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing $(top_srcdir)/configure \
+	AUTHORS COPYING ChangeLog INSTALL NEWS build-aux/config.guess \
+	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+	build-aux/ltmain.sh build-aux/missing
+@ENABLE_DEBUG_TRUE@am__append_1 = itpp_debug.pc
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_blas.m4 \
+	$(top_srcdir)/m4/acx_fft.m4 $(top_srcdir)/m4/acx_lapack.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/itpp/config.h
+CONFIG_CLEAN_FILES = itpp.pc itpp_debug.pc itpp-config
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
+	"$(DESTDIR)$(pkgconfigdir)"
+SCRIPTS = $(bin_SCRIPTS)
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	cscope distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = itpp extras win32 doc tests
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLAS_LIBS = @BLAS_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXXFLAGS_DEBUG = @CXXFLAGS_DEBUG@
+CXXFLAGS_OPT = @CXXFLAGS_OPT@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIFF = @DIFF@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXPLICIT_LIBS = @EXPLICIT_LIBS@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+FFT_LIBS = @FFT_LIBS@
+FGREP = @FGREP@
+FLIBS = @FLIBS@
+GENERIC_LIBRARY_VERSION = @GENERIC_LIBRARY_VERSION@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LAPACK_LIBS = @LAPACK_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NO_UNDEFINED = @NO_UNDEFINED@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_DEBUG = @PACKAGE_DEBUG@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PRIVATE_LIBS = @PRIVATE_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+doxygen_ok = @doxygen_ok@
+dvidir = @dvidir@
+dvips_ok = @dvips_ok@
+exec_prefix = @exec_prefix@
+gs_ok = @gs_ok@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+latex_ok = @latex_ok@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = -I$(top_builddir) -I$(top_srcdir)
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = dist-bzip2
+@HTML_DOC_TRUE@HTML_DOC_DIR = doc
+@RUN_TESTS_TRUE@TEST_DIR = tests
+SUBDIRS = itpp extras win32 $(HTML_DOC_DIR) $(TEST_DIR)
+EXTRA_DIST = \
+	autogen.sh \
+	ChangeLog-2005 \
+	ChangeLog-2006 \
+	ChangeLog-2007 \
+	ChangeLog-2008 \
+	configure.ac.in \
+	itpp-config.1.in \
+	itpp.spec \
+	itpp.spec.in \
+	Makefile.common \
+	NEWS-3.10 \
+	NEWS-3.9 \
+	NEWS-3.99 \
+	NEWS-4.0 \
+	TODO \
+	VERSION
+
+dist_man_MANS = itpp-config.1
+bin_SCRIPTS = itpp-config
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = itpp.pc $(am__append_1)
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makefile.common $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/Makefile.common:
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+itpp.pc: $(top_builddir)/config.status $(srcdir)/itpp.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+itpp_debug.pc: $(top_builddir)/config.status $(srcdir)/itpp_debug.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+itpp-config: $(top_builddir)/config.status $(srcdir)/itpp-config.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-man1: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+cscopelist-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+	-rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-man install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-local uninstall-man \
+	uninstall-pkgconfigDATA
+
+uninstall-man: uninstall-man1
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+	cscopelist-recursive ctags-recursive install-am install-strip \
+	tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-cscope \
+	clean-generic clean-libtool clean-local cscope cscopelist \
+	cscopelist-recursive ctags ctags-recursive dist dist-all \
+	dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-generic \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binSCRIPTS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-man1 install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-recursive uninstall uninstall-am \
+	uninstall-binSCRIPTS uninstall-local uninstall-man \
+	uninstall-man1 uninstall-pkgconfigDATA
+
+@SET_MAKE@
+
+clean-local:
+	rm -f config_summary.log
+
+uninstall-local:
+	rm -rf $(DESTDIR)$(includedir)/itpp
+
+dist-html:
+	$(MAKE) -C doc dist-html
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: