From: Carley, P. <pc...@ch...> - 2004-08-02 19:43:54
|
hello, I'm getting the following messages in /var/log/messages on the target machine when I try to format an iscsi volume using the windows initiator v1.05 or when trying to connect using the Cisco initiator v4.0.188.13 ( 21-May-2004) this is on the SLES8 kernel 2.4.21-231 with the include that you sent me before. Aug 2 07:24:35 linux kernel: process_io(391) 0 -5 Aug 2 07:24:35 linux kernel: istd(483) close conn 0 Aug 2 07:24:35 linux kernel: iscsi_cmnd_release: pdu list not empty! Aug 2 07:24:37 linux kernel: process_io(391) 0 -5 Aug 2 07:24:37 linux kernel: istd(483) close conn 0 Aug 2 07:24:37 linux kernel: iscsi_cmnd_release: pdu list not empty! ***and just continues with the numbers incrementing** iscsid.conf Target iqn.2001-04.net.northernnetworking:iscsitest.disk1 # Users, who can access this target # (no users means anyone can access the target) # User joe secret # Lun definition # (right now only block devices are possible) Lun 0 /dev/sda1 #tried /dev/sda with same results # If you want the blockio mode, specify it as the following example. #Lun 0 /dev/hdc blockio # Alias name for this target Alias Test # various iSCSI parameters # (not all are used right now, see also iSCSI spec for details) #MaxConnections 1 #InitialR2T yes #ImmediateData no #MaxRecvDataSegmentLength 8192 #MaxBurstLength 262144 #FirstBurstLength 65536 #DefaultTime2Wait 2 #DefaultTime2Retain 20 #MaxOutstandingR2T 8 #DataPDUInOrder yes #DataSequenceInOrder yes #ErrorRecoveryLevel 0 Thanks Paul |