-----BEGIN PGP SIGNED MESSAGE-----
Jean Tourrilhes wrote:
|>smsc_ircc_present: can"t get sir_base of 0x2e8
| You need to get the serial driver out of the way (see my web page).
Okay, this is what I tried:
# setserial /dev/ttyS0 uart none
# rmmod serial
// gives me an error as I have serial support compilied in and not as a
// modules - is that a problem?
# modprobe irport io=0x3f8 irq=4
# dongle_attach irda0 -d actisys+
# irattach irda0 -s
And this is the dmesg output:
NET: Registered protocol family 23
IrDA: Registered device irda0 (irport io=0x3F8 irq=4)
IrDA: Unable to find requested dongle type 3
irlap_change_speed(), setting speed to 9600
17:53:14.269177 xid:cmd 63251be1 > ffffffff S=6 s=0 (14)
17:53:14.359088 xid:cmd 63251be1 > ffffffff S=6 s=1 (14)
17:53:14.449075 xid:cmd 63251be1 > ffffffff S=6 s=2 (14)
17:53:14.539061 xid:cmd 63251be1 > ffffffff S=6 s=3 (14)
17:53:14.629046 xid:cmd 63251be1 > ffffffff S=6 s=4 (14)
17:53:14.719032 xid:cmd 63251be1 > ffffffff S=6 s=5 (14)
17:53:14.809019 xid:cmd 63251be1 > ffffffff S=6 s=* skugga hint=0400 [
Computer ] (22)
// But this does not change if I hold my phone infront of the port.
Well, first of all, I am confused of what IO address I should use and
what I should think about that 'Unable to find requested dongle type 3'
Where can I find out what dongle type I need?
I then tried 'modprobe smsc_ircc2' again and got the same errors in dmesg:
found SMC SuperIO Chip (devid=0x5e rev=00 base=0x004e): LPC47N267
smsc_superio_flat(): fir: 0x400, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e
smsc_ircc_present: can't get sir_base of 0x2e8
Do I need to specify any IRQ/IO for this module, too? (I tried io=0x3F8
irq=4) Do I even need this module?
As I said I am new to IRDA, all I want is to connect to my Nokia phone's
memory (and MMC) and all I know is that there is a SMC chipset in my
If somebody could help me a little with some step-by-step instructions,
I'd be very happy.
Thanks very much in advance,
:: placed upon the horizon (casting shadows) ::
:: lost@... + 8053703 + key id 639C32AF ::
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
-----END PGP SIGNATURE-----