Hi George

Thanks for looking over my problem. I tried you suggestion below but still no luck.

My pings still show "Destination Host Unreachable".

sudo ip route show now has
10.0.0.0/24 dev eth0 scope link src 192.168.0.99

and tcpdump still shows
07:24:55.210810 IP 217.150.xxx.yyy.isakmp > 192.168.0.99.isakmp: isakmp: phase 2/others R inf[E]
07:24:55.247233 IP 192.168.0.99.isakmp > 217.150.xxx.yyy.isakmp: isakmp: phase 2/others I inf[E]
07:25:24.781823 IP 217.150.xxx.yyy.isakmp > 192.168.0.99.isakmp: isakmp: phase 2/others R inf[E]
07:25:24.843464 IP 192.168.0.99.isakmp > 217.150.xxx.yyy.isakmp: isakmp: phase 2/others I inf[E]


Anymore suggestions/examples?

Ta

Zac


BTW was you example a client to LAN or LAN to LAN route? (I dont know how to tell the difference)


On 5/22/06, George Borisov <george@dxsolutions.co.uk> wrote:
Zac Barton wrote:
>
> After running the above I dont seem to be able to ping a computer on the
> remote side of the network (which I can thru Windows and OS X). Do I
> need to setup any special tunnel interfaces (ip tunnel add ....) or
> routing rules?

You need to add special routes to ping from end-point to end-point.

Quick example:

LOCAL_IP='192.168.1.1'
REMOTE_LAN=' 10.0.0.0/24'
EXTERNAL_IF='eth0'

/bin/ip route add $REMOTE_LAN dev $EXTERNAL_IF src $LOCAL_IP

More detail (although this is for a LAN - LAN setup) here:
http://www.littleyojik.co.uk/computers/debian_vpn.html


Hope this helps,

--
George Borisov

DXSolutions Ltd