From: Scott E. <sc...@ju...> - 2014-01-06 19:03:46
|
I'm trying to get AP mode working with the Duovero. The mlan0 and uap0 interfaces are there and I can use mlan0 as a client no problem. I built the uaputl utility program (source from the debian package). When I try some commands I get 'Operation not supported' errors root@duovero:~# dmesg | grep mwifi [ 4.790252] mwifiex_sdio mmc1:0001:1: WLAN FW is active [ 5.099792] mwifiex_sdio mmc1:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96) root@duovero:~# lsmod Module Size Used by mwifiex_sdio 19595 0 mwifiex 160431 1 mwifiex_sdio firmware_class 6982 1 mwifiex cfg80211 196305 1 mwifiex rfkill 17399 1 cfg80211 root@duovero:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:15:C9:28:F8:95 inet addr:192.168.10.115 Bcast:192.168.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:110 errors:0 dropped:0 overruns:0 frame:0 TX packets:46 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14029 (13.7 KiB) TX bytes:6688 (6.5 KiB) Interrupt:204 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) mlan0 Link encap:Ethernet HWaddr 00:19:88:24:FB:9C BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) uap0 Link encap:Ethernet HWaddr 00:19:88:24:FB:9C BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@duovero:~/uaputl/uaputl# ./uaputl -iuap0 sys_info dev_name:uap0 Operation not supported ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! root@duovero:~/uaputl/uaputl# ./uaputl -iuap0 sys_config config/uaputl.conf dev_name:uap0 Operation not supported ERR:UAPHOSTCMD is not supported by uap0 Operation not supported ERR:UAPHOSTCMD is not supported by uap0 Can someone who has used AP mode with the Zephyr radio steer me in the right direction? Thanks, Scott -- View this message in context: http://gumstix.8.x6.nabble.com/AP-mode-with-Duover-Zephyr-tp4968531.html Sent from the Gumstix mailing list archive at Nabble.com. |