Re: [Gumstix-users] Chestnut43 board not booting from NAND

[Keane, B. (STRX) <ben...@ka...>]

Hi Ash,

> -----Original Message-----
> From: Ash Charles [mailto:as...@gu...]
> Sent: Friday, 18 November 2011 3:33 AM
> To: General mailing list for gumstix users.
> Subject: Re: [Gumstix-users] Chestnut43 board not booting from NAND
> 
> Hey Ben,
> 
> On Sun, Nov 13, 2011 at 9:00 PM, Keane, Ben (STRX) <ben...@ka...>
> wrote:
> > -----  Notice on the chestnut43 board NAND is 0MiB and on the Tobi it is
> 512MiB.
> >
> > I am having other troubles with the Chestnut43 board - see my email
> subject "hub 1-0:1.0: port 2 disabled by hub (EMI?),        re-
> enabling..." ...
> If I understand this correctly, using the Chestnut43 board means you
> don't have ethernet and the USB is flaky.  I'd say it is pretty likely
> that your Chestnut is bad in this case but suggest a quick
> double-check of the board to board connectors on the Chestnut to see
> if it is broken at all.
> 

I have checked the board to board connectors on the Chestnut, but can not see any physical damage.

Ben

PROPRIETARY: This e-mail contains proprietary information some or all of which may be legally privileged.  It is intended for the recipient only.  If an addressing or transmission error has misdirected this e-mail, please notify the authority by replying to this e-mail.  If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.