From: dtran11 <dt...@gm...> - 2011-03-08 14:36:13
|
Any updates on this issue. I am seeing the same thing on 2.6.33 when using Samba and USBNet. Thanks. ScottEllis wrote: > > I think I am seeing the same problem. Working with a Tobi board using the > gumstix as a bridge, ethernet <-> usbnet through the otg usb. > > A slow data rate, say just a normal rdesktop session through the bridge, > works all day, but trying to stream video through the bridge [video host > > [usbnet gumstix ethernet] -> second host] stops working pretty quickly. > > From the iperf tests I've done, it looks like a read problem. At least for > me, writes out the otg port never seem to fail. > > gumstix usbnet --- iperf write --> second host, 190Mbs, no problems > gumstix usbnet <-- iperf read --- second host, hangs if I run the test > longer then 20 or 30 seconds. Around 100 Mbs for short duration tests if > it doesn't hang. > > Same problem in with both 2.6.31 and 2.6.32. > > I've been digging into the musb driver. > > I'd be interested if you find anything. > > -- View this message in context: http://old.nabble.com/musb-crashes-under-load-tp27211694p31097662.html Sent from the Gumstix mailing list archive at Nabble.com. |