From: Kit P. <kit...@gm...> - 2011-01-25 18:14:19
|
Hey folks. Just got a new Overo Air, setup WPA, and now the thing won't boot. Looks like NAND is junk. Don't know if this is normal: U-Boot 2010.09 (Oct 20 2010 - 10:11:49) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB *** Warning - bad CRC or NAND, using default environment But, later it hangs. udevadm settle - timeout of 8 seconds reached, the event queue contains: /sys/devices/platform/mmci-omap-hs.1/mmc_host/mmc1/mmc1:0001/mmc1:0001:1/net/wlan0 (698) ADDRCONF(NETDEV_UP): wlan0: link is not ready udevadm settle - timeout of 10 seconds reached, the event queue contains: /sys/devices/platform/mmci-omap-hs.1/mmc_host/mmc1/mmc1:0001/mmc1:0001:1/net/wlan0 (698) JFFS2 notice: (537) check_node_data: wrong data CRC in data node at 0x0cab9100: read 0xee15d50, calculated 0x4ceef6ab. JFFS2 notice: (537) check_node_data: wrong data CRC in data node at 0x0defe854: read 0x54af7441, calculated 0x42f88131. Reflash? Or, do I have bad memory? TIA, Kit |