From: AJ O. <coo...@gm...> - 2010-11-11 23:08:49
|
I followed the instructions from the wiki for the boot src, but I must be missing something. Without the boot.scr it loads all the way to a boot prompt. With my boot.scr it hangs after uncompressing the kernel at "... done, booting the kernel." Here's the gist: https://gist.github.com/673375 and inline: mybootenv.cmd: setenv console ttyS2,115200n8 setenv loadaddr 0x82000000 setenv mpurate 720 setenv vram 4M setenv mem 176M setenv dvimode 1024x768MR-16@60 setenv defaultdisplay dvi setenv mmcroot /dev/mmcblk0p2 rw setenv mmcrootfstype ext3 rootwait setenv ethaddr 00:00:00:FF:FF:FF setenv mmcargs 'setenv bootargs console ${console} mpurate=${mpurate} vram=${vram} mem=${mem} omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay} root=${mmcroot} rootfstype=${mmcrootfstype}' setenv loaduimage 'fatload mmc 0 ${loadaddr} uImage' setenv mmcboot 'echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}' run loaduimage run mmcboot mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myubootenv" -d myubootenv.cmd boot.scr Any ideas? AJ ONeal On Thu, Nov 11, 2010 at 3:21 PM, Steve Sakoman <sa...@gm...> wrote: > On Thu, Nov 11, 2010 at 1:43 PM, AJ ONeal <coo...@gm...> wrote: > > I want to change a few things - mcpu, vram, mem, ethaddr. > > > > How do I save these? > > > > saveenv > > Saving Environment to NAND... > > Erasing Nand... > > [hangs] > > As you might expect! There is no NAND, and hence nowhere to save it :-) > > If you want to modify the default settings you will either need to > build a custom u-boot or create a boot.scr file on the FAT partition > that contains a script to make the changes you desire. > > Steve > > > ------------------------------------------------------------------------------ > Centralized Desktop Delivery: Dell and VMware Reference Architecture > Simplifying enterprise desktop deployment and management using > Dell EqualLogic storage and VMware View: A highly scalable, end-to-end > client virtualization framework. Read more! > http://p.sf.net/sfu/dell-eql-dev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |