[Gumstix-users] [Fwd: Re: 2.6.33 kernel not booting]

[Victhor <vic...@gm...>]

Well, I have enabled low-level kernel debugging(thanks to
http://www.mail-archive.com/lin...@vg.../msg26278.html),
found accidentally on Google while looking up for another issue(namely,
a way to test the PowerVR drivers on 3D mode).
Here is what I get:
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage

2524616 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-2.6.33
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2524552 Bytes =  2.4 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.33 (victhor@victhor-laptop) (gcc version 4.3.3 (GCC) )
#2 Thu May 27 21:18:46 BRT 2010
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Gumstix Overo
Memory policy: ECC disabled, Data cache writeback
OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
65024
Kernel command line: console=ttyS2,115200n8 vram=32M omapfb.vram=0:8M
omapfb.mode=dvi:480x272MR-16@60 omapfb.debug=y omapdss.def_disp=lcd43
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait init=/init earlyprintk
bootconsole [earlycon0] enabled
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB 128MB = 256MB total
Memory: 254336KB available (4520K code, 544K data, 144K init, 0K
highmem)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:368
Clocking rate (Crystal/Core/MPU): 26.0/331/500 MHz
Reprogramming SDRC clock to 331882352 Hz
GPMC revision 5.0
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP GPIO hardware version 2.5
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Found NAND on CS0
Registering NAND on CS0
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
Advanced Linux Sound Architecture Driver Version 1.0.21.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource 32k_counter
musb_hdrc: version 6.0, pio, host, debug=0
HS USB OTG: no transceiver configured
musb_hdrc musb_hdrc: musb_init_controller failed with status -19
Unable to handle kernel NULL pointer dereference at virtual address
00000040
pgd = c0004000
[00000040] *pgd=00000000
Internal error: Oops: 5 [#1]
last sysfs file: 
Modules linked in:
CPU: 0    Not tainted  (2.6.33 #2)
PC is at musb_platform_suspend+0x40/0x88
LR is at musb_platform_suspend+0x3c/0x88
pc : [<c02438a0>]    lr : [<c024389c>]    psr: a0000013
sp : cf823e20  ip : cf90ae80  fp : 00000000
r10: cf862000  r9 : cf862194  r8 : c04e2500
r7 : c04c4fbc  r6 : cf8620f8  r5 : cf8620f8  r4 : cf8620f8
r3 : c04c1d4c  r2 : 0000000c  r1 : fa0ab404  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcf8222f0)
Stack: (0xcf823e20 to 0xcf824000)
3e20: cf8620f8 c02438f4 00000000 c0242c94 c045d3bf ffffffed c04c5090
c001ded4
3e40: c0047910 cf823ed8 00000000 00000000 7fffffff ffffffff c04c4fd8
c04c4fe0
3e60: 0000005c fa0ab000 c04c4fbc c0531cc8 c01e0978 00000002 000003e0
c01abbdc
3e80: cf90adc0 cf823ed4 cf90adc0 cf806850 00000000 00000002 000003e0
00000007
3ea0: c010b65c cf90b210 cf90b270 c010b3ec cf822000 c037d160 00000000
c037cf18
3ec0: 00000000 cf823ef8 cf823ed4 c010ba24 c045ec5b cf90b210 cf823ef8
cf90b270
3ee0: 00000000 cf823ef8 cf90b270 cf855b70 00000001 c010bff8 cf855b70
c04c4fe0
3f00: c04c4fe0 c04e7aa4 c04e7aa4 c04e2500 c01e0978 00000000 00000000
c01e29fc
3f20: c04e7aa4 c01e1968 c04e7aa4 c04c4fe0 c04c5014 c04e7aa4 cf823f50
c01e1a98
3f40: 00000000 c01e1a38 c04e7aa4 c01e117c cf80d1b8 cf880cb0 c04e2500
c0025f20
3f60: 00000080 c04e7aa4 cf854000 c01e0a50 c039fdbc 00000000 c0025f20
c04e7a90
3f80: c04e7aa4 00000000 00000000 00000000 00000000 c01e1d9c c0025f20
c04e7a90
3fa0: c001d344 00000000 00000000 c01e2ca4 00000000 c0025f20 c00261fc
c002c344
3fc0: 00000000 00000170 c04c8ca0 00000000 00000000 c0025f20 c00261fc
00000000
3fe0: 00000000 c0008584 00000000 00000000 00000000 c002d8f4 42ffdf21
31dfde10
[<c02438a0>] (musb_platform_suspend+0x40/0x88) from [<c02438f4>]
(musb_platform_exit+0xc/0x20)
[<c02438f4>] (musb_platform_exit+0xc/0x20) from [<c0242c94>] (musb_free
+0x64/0x9c)
[<c0242c94>] (musb_free+0x64/0x9c) from [<c001ded4>] (musb_probe
+0x9d8/0xb20)
[<c001ded4>] (musb_probe+0x9d8/0xb20) from [<c01e29fc>]
(platform_drv_probe+0x1c/0x24)
[<c01e29fc>] (platform_drv_probe+0x1c/0x24) from [<c01e1968>]
(driver_probe_device+0xa4/0x174)
[<c01e1968>] (driver_probe_device+0xa4/0x174) from [<c01e1a98>]
(__driver_attach+0x60/0x84)
[<c01e1a98>] (__driver_attach+0x60/0x84) from [<c01e117c>]
(bus_for_each_dev+0x4c/0x8c)
[<c01e117c>] (bus_for_each_dev+0x4c/0x8c) from [<c01e0a50>]
(bus_add_driver+0xf8/0x288)
[<c01e0a50>] (bus_add_driver+0xf8/0x288) from [<c01e1d9c>]
(driver_register+0xbc/0x148)
[<c01e1d9c>] (driver_register+0xbc/0x148) from [<c01e2ca4>]
(platform_driver_probe+0x1c/0x70)
[<c01e2ca4>] (platform_driver_probe+0x1c/0x70) from [<c002c344>]
(do_one_initcall+0x5c/0x1bc)
[<c002c344>] (do_one_initcall+0x5c/0x1bc) from [<c0008584>] (kernel_init
+0x94/0x110)
[<c0008584>] (kernel_init+0x94/0x110) from [<c002d8f4>]
(kernel_thread_exit+0x0/0x8)
Code: e59f104c e3800004 ebf7eaaa e5940090 (e5903040) 
---[ end trace 1b75b31a2719ed1c ]---
Kernel panic - not syncing: Attempted to kill init!