From: William H. <wi...@ne...> - 2009-03-20 04:27:16
|
Hi Prabhu, Did you save the bootargs before rebooting? Can you check to see if getty is being run for the LCD/keyboard? William Prabhu nath wrote: > Hi > > I have connected Samsung LTE430WQ-F0C to my verdex board. Also I > have enabled the driver for this in my linux configuration > Device Drivers --> Graphics Support --> LCD Panel ( Samsung LTE430WQ-F0C ). > > Copied the uImage to RAM, set the bootargs as follows. > > setenv bootargs console=tty0 console=tty1 > video=pxafb:mode:480x272-8,active root=1f01 rootfstype=jffs2 > reboot=cold,hard > > I am seeing the logs on the LCD till the following log message > Starting httpd ..... > > and hangs here > > But I can see the gumstix login prompt on my serial console. > > Scenario 2: > Even after I change the bootargs to remove ttyS0, still I can > see the gumstix login prompt on my serial console only, but not on the LCD. > > > Please help. > > Regards, > Prabhu > > > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------------ > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are > powering Web 2.0 with engaging, cross-platform capabilities. Quickly and > easily build your RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > > > ------------------------------------------------------------------------ > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |