From: Rob A. <rob...@gm...> - 2009-01-30 15:51:11
|
Hi Don, Do you have a guestimate on when the Overo motherboards with On-board Bluetooth(R) wireless communication and or On-board 802.11g wireless communication will be avaliable? Kind regards Rob On Fri, Jan 30, 2009 at 3:38 PM, Don Anderson <do...@gu...> wrote: > Hi Gary > > We have posted some information about our plans for our Overo product line > in gumstix.net: > > > http://www.gumstix.net/Hardware/view/Hardware/Product-Roadmap-Overo/112.html > > Although we have not announced release dates for these products, you can > look for the first of the LCD-capable expansion boards to be released this > winter 2009. This would be second Overo expansion board, in addition to the > Summit board that we released last Fall. > > > Don > @ Gumstix > ========== > > > On Fri, Jan 30, 2009 at 7:13 AM, <Gar...@jo...> wrote: > >> Keeping along with this thread, what is the roadmap and time frame for the >> Overo system to get an LCD display interface? >> >> Also just diving into this are the drivers available for the LCD Display >> if >> an LCD display where to be "prototyped" onto the >> Summit board? >> >> Gary Ellerbusch >> Senior Electrical Design Engineer >> >> >> >> >> gnmckinney >> <gary.n.mckinney@ >> gmail.com> To >> gum...@li... >> 01/30/2009 09:56 cc >> AM >> Subject >> Re: [Gumstix-users] Rapid >> Please respond to Development of Display Application >> "General mailing >> list for gumstix >> users." >> <gumstix-users@li >> sts.sourceforge.n >> et> >> >> >> >> >> >> >> >> >> digipepp wrote: >> > >> > We have a need to rapidly produce a prototype that requires an LCD >> display >> > and custom GUI for a grad class. The display needs to be small, not >> > desktop size, much like the Samsung LCD provided on the Gumstix web >> site. >> >> > >> > We are interested in the Overo as it sounds like the OpenEmbedded is >> > pre-configured to launch Enlightenment and all of the necessary display >> > drivers. However, I do not believe it can directly drive said Samsung >> > display. In that case, can you recommend any small DVI displays, >> roughly >> > 4" to 6" diagonal? Or can you recommend any modifications to the Overo >> > expansion board that might allow use to direct drive the display? >> > >> >> You are correct that the current Overo Earth with Summit board is not >> configured to directly drive an LCD display. I suppose you could find a 4 >> to 6 inch LCD display with HDMI input (or use a HDMI to VGA converter: >> http://www.ambery.com/hddvitovgafo.html is one possiblity). >> >> You can also take a look at the Summit expansion board schematics ( >> http://pubs.gumstix.org/boards/SUMMIT/PCB30001-R2185/) to see how the >> video >> is currently setup - the Overo Earth board does bring the raw LCD signals >> out through J1 on the board so that would be a "possiblity" but you will >> still need to provide the power and interfacing circuitry (and I doubt it >> would be a "fast fix" to your needs). >> >> Hope this helps. >> >> gm... >> -- >> View this message in context: >> >> http://www.nabble.com/Rapid-Development-of-Display-Application-tp21741481p21748616.html >> >> Sent from the Gumstix mailing list archive at Nabble.com. >> >> >> >> ------------------------------------------------------------------------------ >> >> This SF.net email is sponsored by: >> SourcForge Community >> SourceForge wants to tell your story. >> http://p.sf.net/sfu/sf-spreadtheword >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> >> >> ------------------------------------------------------------------------------ >> This SF.net email is sponsored by: >> SourcForge Community >> SourceForge wants to tell your story. >> http://p.sf.net/sfu/sf-spreadtheword >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- Rob Addis 0044 (0) 7913445595 |