From: Luis G. <lg...@bl...> - 2008-06-27 06:51:29
|
Where can I get the source code for the UBoot loader? - it seems that we're still using release 1.2.0 that is about 17 months old - and that releases 1.3.x have a few benefits that we could incorporate. I would like to try and build a 1.3.x version and try it out on y Verdex MX4-BT Regards, Peter (Luis) On Jun 27, 2008, at 12:20 AM, Dave Hylands wrote: > Hi Timothy, > > On Thu, Jun 26, 2008 at 1:49 AM, Timothy Clacy <tc...@ph...> > wrote: >> The Gumstix folk seem very reluctant to release basic hardware >> information >> that you need to initialise the memory controller. Since they don't >> provide >> schematics, they should, at an absolute minimum, provide the >> following or >> else state on the web-site that it's a Linux only product: >> >> Flash >> Part Type >> Number of Parts >> 16 bit | 32 bit > > I believe that the part number is printed on the flash chips. > >> SDRAM >> Part Type >> Number of Parts >> rows, columns, banks >> tREF >> tCAS (in clocks) > > Same here. > > You can also see what settings are used by looking at the u-boot > source code. > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |