From: Jared J. <jje...@gm...> - 2008-02-24 22:54:37
|
> I saw an error just like this when I took too much current out of a GPSStix > board (so the supply power dropped enough to turn the chips off). This > message seems to be the default one if the gumstix board can't "see" the > audio chip. > > You could try checking that the boards aren't touching, are clipped together > properly and if possible that the supply voltage on the board is at a > reasonable level. If doing all the obvious things doesn't fix it then it > sounds like its probably a faulty board... tried reseating and inspecting several times; power supply is from the supplied wall wart so i'm assuming it's the right voltage and current. :/ thanks for the pointer. |