From: Thierry G. <thi...@re...> - 2008-01-25 10:32:17
|
Hi Justin, There are two pages on the Wiki which may help : http://docwiki.gumstix.org/Networking#Bluetooth_Personal_Area_Network http://docwiki.gumstix.org/Bluetooth_on_OS_X#Setting_up_PAN I followed the instructions in the second one, and they work (I have a Mac). If the first page does not help you, I think that you could use the Gumstix's side on the second instructions and use the following commands on your Linux box to connect to the Gumstix (you may have to adapt them to your config) : #/etc/init.d/bluetooth start #hciconfig hci0 up #pand --listen --role NAP #ifconfig bnep0 192.168.0.1 up Then, if it worked, you should be able to ping 192.168.0.2 and to connect via ssh. -- Thierry Genovese > > Hello everyone, > > I am looking to get ssh over bluetooth working on my gumstix. I've > read > through various threads on this mailing list regarding setting this > up but > have not had any success. I can connect to the gumstix over > bluetooth like > a serial connection, but I really want to use tcp/ip instead. > > I also found this pdf: > > laurocat.com/webdav/Varios/BluetoothHowto.pdf > > which attempts to show how to set this up in various configurations > however, > the one I need is not in there. What I want to do is connect from a > linux > box, as a client, to the gumstix, as a server, using ssh over > bluetooth. I > am using a basix 400xm-bt gumstix and an Ubuntu 7.10 linux box. > > Any assistance would be greatly appreciated, > Justin |