From: Peter L. <pl...@gm...> - 2007-08-21 18:42:25
|
Hi, I'm trying to get my Sony Acx705akm display running and got the test program from: http://docwiki.gumstix.org/Display#Setting_up_the_Sony_ACX705AKM_on_gumstix My .config for the linux kernel has: CONFIG_FB_PXA=m # CONFIG_FB_PXA_ALPS_CDOLLAR is not set # CONFIG_FB_PXA_SHARP_LQ043_PSP is not set CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C=y CONFIG_FB_PXA_PARAMETERS=y so I think the PXA FB stuff is in the build and should be able to handle the Sony display despite the Samsung being configured. In U-boot's bootargs, I have: video=pxafb:mode:240x160-16,active,hsynclen:7,right:16,left:5,upper:19,low er:19,vsynclen:2,hsync:1,vsync:1,pixclockpol:0,pixclock:216363 and I do: mknod /dev/fb0 c 29 0 chmod a+rw /dev/fb0 modprobe pxafb I compile the test program from the Web page and do: ppmv_sony692 sony_penguin.ppm The code displays the expected message: Mapping SCREENSIZE: 76800 done width = 240, height = 160 done which seems to indicate that the device was opened correctly and the image was written to the frame buffer. However, my screen shows nothing. What steps am I missing and how do I go about diagnosing what's wrong? Thanks for all help. |