From: Agustin H. <ah...@gm...> - 2007-06-04 17:43:28
|
I am trying to dowload the i2c-Boot-m128-16MHz-eep.hex to the eeprom memory but a message in avr studio appear "The contents of the hex file does not fit in the select device". the size of this file is 117 byetes vs 79 bytes of eeprom-init.hex. There are something worng in my file or i m doing something wrong? Thanks for all 2007/6/1, Dave Hylands <dhy...@gm...>: > > Hi Agustin, > > On 6/1/07, Agustin Huacuz <ah...@gm...> wrote: > > Which is the diference betwen this files: > > > > eeprom-init.hex & i2c-Boot-m128-16MHz-eep.hex > > > > Both are for eeprom memory to save the adress 0x0b? > > It turns out that they're both actually the same. > > They cause eeprom to be intialized to 0xFF, which will in turn cause > the bootloader to use its default address of 0x0B. > > I think I created eeprom-init.c before I realized that > i2c-Boot-m128-16MHz-eep.hex had the correct values in it. > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |