Re: [Gumstix-users] LCD Frame Buffer

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

OK

i did all that and reflashed Gumstix

here is the result of my 'dmesg'

.........
Linux version 2.6.15gum (root@localhost.localdomain) (gcc version 3.4.5) #4
Mon
Jun 5 17:24:38 EEST 2006
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
Machine: The Gumstix Platform
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:3
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2
reboot=co
ld,hard
video=pxafb:mode:640x480-16,passive,color,hsynclen:3,right:5,left:7,vsyn
clen:39,pixclock:80000,hsync:1,vsync:1,pixclockpol:1
PID hash table entries: 512 (order: 9, 8192 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 63232KB available (1289K code, 253K data, 68K init)
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
Gumstix Flash ROM: Found an alias at 0x400000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x800000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0xc00000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x1000000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x1400000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x1800000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x1c00000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x2000000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x2400000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x2800000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x2c00000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x3000000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x3400000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x3800000 for the chip at 0x0
Gumstix Flash ROM: Found an alias at 0x3c00000 for the chip at 0x0
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=32
Using static partitions on Gumstix Flash ROM
Creating 2 MTD partitions on "Gumstix Flash ROM":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00400000 : "RootFS"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 68K
NET: Registered protocol family 1
Set (AF1,out,set) via /proc/gpio/GPIO12
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
pxa2xx_udc: version 4-May-2005
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
usb0: MAC 0a:00:0b:42:67:e1
usb0: HOST MAC 0a:00:0b:42:67:e2
usb0: RNDIS ready
NET: Registered protocol family 17
smc91x: not found (-19).
smc91x: not found (-19).

how should the line look which states that the Framebuffer is active and is
it active here?

----- Original Message ----- 
From: "Sumit Birla" <sb...@ta...>
To: "General mailing list for gumstix users."
<gum...@li...>
Sent: Monday, June 05, 2006 5:16 PM
Subject: Re: [Gumstix-users] LCD Frame Buffer

> This is what I did -
>
> cd build_arm_nofpu/linux-2.6.15gum
> export ARCH=arm
> export DEPMODE=/bin/true
> make menuconfig
>
> In Graphics Support ->
>   select Support for Framebuffer device
>   select PXA LCD framebuffer support
>   select PXA LCD command line helper funciton
>
> Save changes
> make clean
> cd ../../
> make
>
> If everything compiles fine, I get a new rootfs.arm_nofpu.jffs2.  I send
> this to gumstix using kermit. 