From: Serge S. <se...@so...> - 2005-12-08 21:50:40
|
Hi Holly, Thanks and I guess this needs to be interfaced through SPI which is only on the Robostix. Or maybe I can use something like the BL233 found here http://www.i2cchip.com/#BL233 to go RS232 to SPI? Then I need to find a convienient way to write data to the display.... I must admint that I am pretty new to all this electronics stuff so there is a lot of learning involved. Thansks, Serge Holly Gates wrote: > Digikey is selling a few small OLED modules, like 128x64 size. Check out > digikey # 475-1125-ND. I was thinking of getting that one working with > the gumstix, but haven't had a chance to work on it. OLED modules seem > to be difficult to buy retail. If you find a place to buy them, let the > list know! > > If you want something very "readable" in medium to high ambient light > conditions, check out E Ink (which is where I work). The only thing > widely available now is a 6" diagonal SVGA active matrix. If you need > performance in low to zero lighting, OLED seems better. Though certain > of our customers have said you can read E Ink well with night vision > goggles on... > > -Holly > |