[Gumstix-users] U-BOOT 1.1.2 r374

[Takahide O. <tohkami@EINK.com>]

Hi.

We've been using GPIO83 for the acknowledge signal from a display
controller.
It's been ok with U-BOOT 1.1.2 r370.
The signal is strange with U-BOOT 1.1.2 r374.
Its ChangeLog says: "Enable STUART".
Are there any more detailed descriptions of the changes from r370?

TakaHide Ohkami
E Ink Corporation
Cambridge, MA, U.S.A.