DSP worked for me on Overo Firestorm with kernel 3.22
Follow jumpnow instructions but:
- insert ti-linuxutils-3.22...bb in org.../recipes/images...
- change preferred_version_ti_linuxutils to "3.22.00.02"
so to say:
download the correct version of the ti for your kernel and point to it,
otherwise you get a version mismatch.
> Message: 5
> Date: Wed, 4 Jul 2012 11:56:54 -0700 (PDT)
> From: Jeff L <jeffreylaut@...>
> Subject: [Gumstix-users] DSP, robovero, and 3.0.0
> To: gumstix-users@...
> Message-ID: <1341428214001-4964810.post@...>
> Content-Type: text/plain; charset=us-ascii
> I need to be able to use the DSP while also using the robovero. Of
> using the robovero means I need to use kernel 2.6.36 or later, while it
> seems most success for using the DSP is with kernel 2.6.34
> I followed the jumpnow tutorial and was able to get the DSP working with
> 2.6.34 as a starting point.
> I then tried following what DaWaN did in this post;
> but I couldn't figure how to use the 3.0.0 kernel... should there be a
> "linux-omap3_3.0.0.bb" recipe? If so, where can I get it?
> I tried instead using "linux-omap3_2.6.39.bb". It successfully built and
> was able to run on the overo, however the DSP was not working...
> I suppose another option is to fix the cdc_acm module in 2.6.34 so it will
> work with the robovero. has there been any success with that?
> by the way, this is on an overo firestorm.