I've just put the rootfs.arm_nofpu.jffs2 image on my gumstix to upgrade to
the 2.6.15gum kernel and it now won't finish booting. I get the following
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Using static partitions on Gumstix Flash ROM
Creating 2 MTD partitions on "Gumstix Flash ROM":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x01000000 : "RootFS"
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 56K
and it hangs. I'm unsure as to whether it is actually freeing the memory
(not surprising considering the time taken to put the image on there) or
if there's an underlying problem. It's been like this for about an hour.
I have just rebooted it and the same thing occurs. Any help would be
From: Dave Hylands <dhylands@gm...> - 2006-05-25 07:00:13
On 5/24/06, Galen Brambley <galen.brambley@...> wrote:
> Hi all,
> I've just put the rootfs.arm_nofpu.jffs2 image on my gumstix to upgrade t=
> the 2.6.15gum kernel and it now won't finish booting. I get the followin=
I just built version 996 and reloaded and everything seems to work
fine. I'm using a robostix/gumstix-400xm/netMMC stack. What boards do
you have? Which SVN version are you using?
Vancouver, BC, Canada