From: John Pauley <pauleyj@be...> - 2008-06-15 03:17:37
With netMMC, netCF, and netuSD on connex and verdex based stacks, I
have an issue of _not_ getting a dhcpd assigned ip address if the
ethernet cable is plugged into the netXXX after the stack boots, e.g.
boot stack then plug in ethernet cable, no ip address is assigned.
The only items in /etc/network/interfaces is the loopback and eth0
device, no wifi, bluetooth, etc. ifconfig shows eth0 up, but no ip
address, I have to manually if down/up before an address is assigned.
This behavior occurs with both buildroot and OE builds. Any ideas on
how to get it to obtain an ip address if the cable is plugged in post