Are there any tutorials out there on how to setup your tobi-duo?
I've bitbaked my own console image and have the source tree for
linux-2.6.36. As for the network interfaces, just default settings, auto
eth0... This is where I think I have my issue... are they eht0 and 1? or
eth2 and 3? There is no way for me to check because when I have my Overo on
my Tobi-Duo I can't get any visual output, nor can I connect to it via
Thanks in advance!
From: Scott Ellis <scott@ju...> - 2011-04-18 10:05:03
Last I tried, it was eth0 and eth1. I setup a working static IP
on eth0 with the COM on a regular Tobi board first making sure ssh
worked. Then I plugged the COM into the Tobi-Duo and trial and error
figured out what was eth0, connected and then configured eth1.
Someone smarter then me probably would have looked at the schematic.
It would have been hard to work with the Tobi-Duo without a regular
Tobi to test with. I haven't used mine in awhile.
Sent from my Linux box