From: John W. Lerch <jlerch@pr...> - 2006-03-05 20:07:24
This seems like an often discussed topic, but nothing I found seemed to
do the trick for me (poked around for over an hour). =20
I get literally hundreds of messages of the basic format as:=20
"tar: gcc-3.4.5/XXXXXX/YYYYY: Cannot open: No such file or directory"=20
Followed by the following:
tar: gcc-3.4.5/move-if-change: Cannot write: No space left on device
tar: Skipping to next header
tar: Error exit delayed from previous errors
] Error 2
I re-ran the set up on the "buildroot under colinux" page several times
without any luck. Any ideas as to what is happening?
From: Dave Hylands <dhylands@gm...> - 2006-03-06 01:20:02
> tar: gcc-3.4.5/move-if-change: Cannot write: No space left on device
Sounds like your "hard-drive" is full.
Note that colinux volumes won't grow any bigger than what they are
originally. I'm currently using a 4 Gb one, and my gumstix-builroot
takes about 1.2 Gb.
Vancouver, BC, Canada
From: Daniel Morrigan <digilord@ma...> - 2006-03-06 01:40:24
Although it is a bit dated I have a setup for coLinux available for
download at http://gumstix.digilord.net. It has a much larger drive
space for the buildroot.
On 3/5/06, Dave Hylands <dhylands@...> wrote:
> Hi John,
> > tar: gcc-3.4.5/move-if-change: Cannot write: No space left on device
> Sounds like your "hard-drive" is full.
> Note that colinux volumes won't grow any bigger than what they are
> originally. I'm currently using a 4 Gb one, and my gumstix-builroot
> takes about 1.2 Gb.
> Dave Hylands
> Vancouver, BC, Canada
> This SF.Net email is sponsored by xPML, a groundbreaking scripting langua=
> that extends applications into web and mobile media. Attend the live webc=
> and join the prime developer group breaking into this new coding territor=
> gumstix-users mailing list
Daniel A. Morrigan
He who says it cannot be done is interrupting the one doing it.