From: Gonçalo B. <gon...@gm...> - 2011-07-10 19:00:50
|
Dear all, I'm kind of confused. Does the overo-2011.03 version supports the Caspa camera? If not, does anyone have a patch that works with this version? I've seen this http://wiki.gumstix.org/index.php?title=Caspa_camera_boardsbut i want to make my own image and that part of the tutorial didn't work for me. Thanks, gonçalo |
From: JamesAng <ang...@gm...> - 2011-07-11 09:18:03
|
Gonçalo Bernardo wrote: > > Dear all, > > I'm kind of confused. Does the overo-2011.03 version supports the Caspa > camera? If not, does anyone have a patch that works with this version? > I've seen this > http://wiki.gumstix.org/index.php?title=Caspa_camera_boardsbut > i want to make my own image and that part of the tutorial didn't work > for me. > > Thanks, > gonçalo > > Hi, I'm also looking out for the support for MT9V032 camera. I found that the upstream 2.6 kernel has a commit on 20 May 2011. http://git.linuxtv.org/linux-2.6.git?a=commit;h=0f2ce168c850b4ea4b0d71f59c5603bdee85b6b5 http://git.linuxtv.org/linux-2.6.git?a=commit;h=0f2ce168c850b4ea4b0d71f59c5603bdee85b6b5 I'm not sure if this commit will work for our Overo. James. -- View this message in context: http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32035871.html Sent from the Gumstix mailing list archive at Nabble.com. |
From: JamesAng <ang...@gm...> - 2011-07-12 09:45:18
|
Linux-Omap upstream also has the commit for the MT9V032 sensor http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=0f2ce168c850b4ea4b0d71f59c5603bdee85b6b5 http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=0f2ce168c850b4ea4b0d71f59c5603bdee85b6b5 I took a quick comparison of the files affected and it seems largely different. I'm no expert with Linux nor v4l2 but the headers files needed in the .C file are significantly different. Overo's uses media/v4l2-int-device.h while the upstream uses linux/videodev2.h, linux/v4l2-mediabus.h, media/v4l2-ctrls.h, media/v4l2-device.h and media/v4l2-subdev.h so are the codes in the .C files that follows in the upstream. What I wish to know is 1) Which Linux-OMAP kernel upstream is Steve/Gumstix tracking? a) http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=summary http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=summary b) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git c) or... 2) How can we determine the baseline that Overo is using against the LO's upstream baseline that includes the new MT9V032 drivers? Thanks in adv. James. -- View this message in context: http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32044528.html Sent from the Gumstix mailing list archive at Nabble.com. |
From: Gonçalo B. <gon...@gm...> - 2011-07-13 07:08:42
|
Hey, @Neil, What do you mean by copying? Which files did you replace? >From where did you download that kernel? Thanks, gonçalo On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm...> wrote: > > > enmach wrote: > > > > Hi, > > > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The > > MT9V032 driver found in later kernels is a complete rewrite and, last I > > checked, does not yet work with Caspa. > > > > - > > Neil > > > > Hi Neil, > > Do you know what is the baseline of later kernel upstream that can work > with > the new driver? > > What I foresee is that we are moving towards a 2.6.39 or later kernel in > the > new overo-2011.03 branch but no driver to support the sensor. Falling back > to 2.6.34 and its driver is a damper (~~) > > Is Overo's/Steve's kernel tracking that from TI's or from Linus's like I > mentioned earlier? or...? > > Thks in adv. > > James. > > -- > View this message in context: > http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html > Sent from the Gumstix mailing list archive at Nabble.com. > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- .::Gonber::. |
From: Marius A. <mar...@gm...> - 2011-07-14 16:40:08
|
I'm not exactly familiar with any of this, but it seems that the image expects newer kernel. What I believe the issue here is the (in)famous console switch from ttyS2 in 2.6.34 kernel to ttyO2 in >=2.6.36 kernels. The change in /etc/inittab from "S:2345:respawn:/sbin/getty 115200 ttyO2" to "S:2345:respawn:/sbin/getty 115200 ttyS2" should make it boot (or rather open the terminal) again. Hope that helps. Regards, Marius. On 2011.07.14, at 12:53, Gonçalo Bernardo wrote: > ok, here go my attempts' descriptions: > > 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch > > Error: No such file or directory: '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' > I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it worked > > 2) bitbake omap3-console-image from overo-2011.03 branch > > 3) Put everything on the microSD, including replacing the contents of /boot by the uImage generated for linux-omap3-caspapx. > > Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 minutes" > > Now I can think of 2 possibilities: > > a) BOOT_SPLASH is needed > > b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. > > Do you have any suggestions? > > Tks in adv, > gonçalo > > > On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu...> wrote: > Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb > > This recipe came from the Overo branch. > > - > Neil > > > On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: > > Hey, > > > > @Neil, > > What do you mean by copying? Which files did you replace? > > From where did you download that kernel? > > > > Thanks, > > gonçalo > > > > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... > > <mailto:ang...@gm...>> wrote: > > > > > > > > enmach wrote: > > > > > > Hi, > > > > > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The > > > MT9V032 driver found in later kernels is a complete rewrite and, > > last I > > > checked, does not yet work with Caspa. > > > > > > - > > > Neil > > > > > > > Hi Neil, > > > > Do you know what is the baseline of later kernel upstream that can > > work with > > the new driver? > > > > What I foresee is that we are moving towards a 2.6.39 or later > > kernel in the > > new overo-2011.03 branch but no driver to support the sensor. > > Falling back > > to 2.6.34 and its driver is a damper (~~) > > > > Is Overo's/Steve's kernel tracking that from TI's or from Linus's like I > > mentioned earlier? or...? > > > > Thks in adv. > > > > James. > > > > -- > > View this message in context: > > http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html > > Sent from the Gumstix mailing list archive at Nabble.com. > > > > > > ------------------------------------------------------------------------------ > > AppSumo Presents a FREE Video for the SourceForge Community by Eric > > Ries, the creator of the Lean Startup Methodology on "Lean Startup > > Secrets Revealed." This video shows you how to validate your ideas, > > optimize your ideas and identify your business strategy. > > http://p.sf.net/sfu/appsumosfdev2dev > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > <mailto:gum...@li...> > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > -- > > .::Gonber::. > > > > > > > > ------------------------------------------------------------------------------ > > AppSumo Presents a FREE Video for the SourceForge Community by Eric > > Ries, the creator of the Lean Startup Methodology on "Lean Startup > > Secrets Revealed." This video shows you how to validate your ideas, > > optimize your ideas and identify your business strategy. > > http://p.sf.net/sfu/appsumosfdev2dev > > > > > > > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > -- > .::Gonber::. > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev_______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |
From: Neil M. <ne...@gu...> - 2011-07-12 23:12:36
|
Hi, I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The MT9V032 driver found in later kernels is a complete rewrite and, last I checked, does not yet work with Caspa. - Neil |
From: James <ang...@gm...> - 2011-07-26 03:20:13
Attachments:
0001-board-overo-Add-Caspa-camera-support.patch
|
Hi Neil, Attached is Laurent Pinchart's latest patch for overo board to support the new MT9V032 driver. He mentioned to try out the v3.0 kernel tree at http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-next-sensors He fixed the wrongly swapped define value for the ROW & COLUMN in his earlier version. Will you be able to run some test on that bring us up to date? Thanks in adv. James. On Wed, Jul 13, 2011 at 7:11 AM, Neil MacMunn <ne...@gu...> wrote: > Hi, > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The > MT9V032 driver found in later kernels is a complete rewrite and, last I > checked, does not yet work with Caspa. > > - > Neil > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- Regards, James |
From: JamesAng <ang...@gm...> - 2011-07-13 01:15:19
|
enmach wrote: > > Hi, > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The > MT9V032 driver found in later kernels is a complete rewrite and, last I > checked, does not yet work with Caspa. > > - > Neil > Hi Neil, Do you know what is the baseline of later kernel upstream that can work with the new driver? What I foresee is that we are moving towards a 2.6.39 or later kernel in the new overo-2011.03 branch but no driver to support the sensor. Falling back to 2.6.34 and its driver is a damper (~~) Is Overo's/Steve's kernel tracking that from TI's or from Linus's like I mentioned earlier? or...? Thks in adv. James. -- View this message in context: http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html Sent from the Gumstix mailing list archive at Nabble.com. |
From: Neil M. <ne...@gu...> - 2011-07-13 15:40:36
|
Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb This recipe came from the Overo branch. - Neil On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: > Hey, > > @Neil, > What do you mean by copying? Which files did you replace? > From where did you download that kernel? > > Thanks, > gonçalo > > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... > <mailto:ang...@gm...>> wrote: > > > > enmach wrote: > > > > Hi, > > > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The > > MT9V032 driver found in later kernels is a complete rewrite and, > last I > > checked, does not yet work with Caspa. > > > > - > > Neil > > > > Hi Neil, > > Do you know what is the baseline of later kernel upstream that can > work with > the new driver? > > What I foresee is that we are moving towards a 2.6.39 or later > kernel in the > new overo-2011.03 branch but no driver to support the sensor. > Falling back > to 2.6.34 and its driver is a damper (~~) > > Is Overo's/Steve's kernel tracking that from TI's or from Linus's like I > mentioned earlier? or...? > > Thks in adv. > > James. > > -- > View this message in context: > http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html > Sent from the Gumstix mailing list archive at Nabble.com. > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > <mailto:gum...@li...> > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > -- > .::Gonber::. > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > > > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |
From: Gonçalo B. <gon...@gm...> - 2011-07-14 09:54:00
|
ok, here go my attempts' descriptions: 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch Error: No such file or directory: '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it worked 2) bitbake omap3-console-image from overo-2011.03 branch 3) Put everything on the microSD, including replacing the contents of /boot by the uImage generated for linux-omap3-caspapx. Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 minutes" Now I can think of 2 possibilities: a) BOOT_SPLASH is needed b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. Do you have any suggestions? Tks in adv, gonçalo On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu...> wrote: > Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb > > This recipe came from the Overo branch. > > - > Neil > > > On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: > > Hey, > > > > @Neil, > > What do you mean by copying? Which files did you replace? > > From where did you download that kernel? > > > > Thanks, > > gonçalo > > > > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... > > <mailto:ang...@gm...>> wrote: > > > > > > > > enmach wrote: > > > > > > Hi, > > > > > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. > The > > > MT9V032 driver found in later kernels is a complete rewrite and, > > last I > > > checked, does not yet work with Caspa. > > > > > > - > > > Neil > > > > > > > Hi Neil, > > > > Do you know what is the baseline of later kernel upstream that can > > work with > > the new driver? > > > > What I foresee is that we are moving towards a 2.6.39 or later > > kernel in the > > new overo-2011.03 branch but no driver to support the sensor. > > Falling back > > to 2.6.34 and its driver is a damper (~~) > > > > Is Overo's/Steve's kernel tracking that from TI's or from Linus's > like I > > mentioned earlier? or...? > > > > Thks in adv. > > > > James. > > > > -- > > View this message in context: > > > http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html > > Sent from the Gumstix mailing list archive at Nabble.com. > > > > > > > ------------------------------------------------------------------------------ > > AppSumo Presents a FREE Video for the SourceForge Community by Eric > > Ries, the creator of the Lean Startup Methodology on "Lean Startup > > Secrets Revealed." This video shows you how to validate your ideas, > > optimize your ideas and identify your business strategy. > > http://p.sf.net/sfu/appsumosfdev2dev > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > <mailto:gum...@li...> > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > -- > > .::Gonber::. > > > > > > > > > ------------------------------------------------------------------------------ > > AppSumo Presents a FREE Video for the SourceForge Community by Eric > > Ries, the creator of the Lean Startup Methodology on "Lean Startup > > Secrets Revealed." This video shows you how to validate your ideas, > > optimize your ideas and identify your business strategy. > > http://p.sf.net/sfu/appsumosfdev2dev > > > > > > > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- .::Gonber::. |
From: Jerry W. <who...@ya...> - 2011-07-14 16:10:18
|
Are you getting this message from the serial terminal or the monitor? ________________________________ From: Gonçalo Bernardo <gon...@gm...> To: General mailing list for gumstix users. <gum...@li...> Sent: Thu, July 14, 2011 5:53:48 AM Subject: Re: [Gumstix-users] Caspa (mt9v032) camera kernel support ok, here go my attempts' descriptions: 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch Error: No such file or directory: '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it worked 2) bitbake omap3-console-image from overo-2011.03 branch 3) Put everything on the microSD, including replacing the contents of /boot by the uImage generated for linux-omap3-caspapx. Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 minutes" Now I can think of 2 possibilities: a) BOOT_SPLASH is needed b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. Do you have any suggestions? Tks in adv, gonçalo On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu...> wrote: Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb > >This recipe came from the Overo branch. > >- >Neil > > > >On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: >> Hey, >> >> @Neil, >> What do you mean by copying? Which files did you replace? >> From where did you download that kernel? >> >> Thanks, >> gonçalo >> >> On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... > >> <mailto:ang...@gm...>> wrote: >> >> >> >> enmach wrote: >> > >> > Hi, >> > >> > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. The >> > MT9V032 driver found in later kernels is a complete rewrite and, >> last I >> > checked, does not yet work with Caspa. >> > >> > - >> > Neil >> > >> >> Hi Neil, >> >> Do you know what is the baseline of later kernel upstream that can >> work with >> the new driver? >> >> What I foresee is that we are moving towards a 2.6.39 or later >> kernel in the >> new overo-2011.03 branch but no driver to support the sensor. >> Falling back >> to 2.6.34 and its driver is a damper (~~) >> >> Is Overo's/Steve's kernel tracking that from TI's or from Linus's like I >> mentioned earlier? or...? >> >> Thks in adv. >> >> James. >> >> -- >> View this message in context: >> >>http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html >> >> Sent from the Gumstix mailing list archive at Nabble.com. >> >> >> >>------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> <mailto:gum...@li...> > >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> >> >> -- >> .::Gonber::. >> >> >> >> ------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev >> >> >> >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > >------------------------------------------------------------------------------ >AppSumo Presents a FREE Video for the SourceForge Community by Eric >Ries, the creator of the Lean Startup Methodology on "Lean Startup >Secrets Revealed." This video shows you how to validate your ideas, >optimize your ideas and identify your business strategy. >http://p.sf.net/sfu/appsumosfdev2dev >_______________________________________________ >gumstix-users mailing list >gum...@li... >https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- .::Gonber::. |
From: Gonçalo B. <gon...@gm...> - 2011-07-14 16:35:40
|
"INIT: Id "S" respawning too fast: disabled for 5 minutes" i get this on the serial terminal On Thu, Jul 14, 2011 at 6:10 PM, Jerry Woods <who...@ya...> wrote: > > Are you getting this message from the serial terminal or the monitor? > > ------------------------------ > *From:* Gonçalo Bernardo <gon...@gm...> > *To:* General mailing list for gumstix users. < > gum...@li...> > *Sent:* Thu, July 14, 2011 5:53:48 AM > *Subject:* Re: [Gumstix-users] Caspa (mt9v032) camera kernel support > > ok, here go my attempts' descriptions: > > 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch > > Error: No such file or directory: > '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' > I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it worked > > 2) bitbake omap3-console-image from overo-2011.03 branch > > 3) Put everything on the microSD, including replacing the contents of /boot > by the uImage generated for linux-omap3-caspapx. > > Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 > minutes" > > Now I can think of 2 possibilities: > > a) BOOT_SPLASH is needed > > b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. > > Do you have any suggestions? > > Tks in adv, > gonçalo > > > On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu...> wrote: > >> Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb >> >> This recipe came from the Overo branch. >> >> - >> Neil >> >> >> On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: >> > Hey, >> > >> > @Neil, >> > What do you mean by copying? Which files did you replace? >> > From where did you download that kernel? >> > >> > Thanks, >> > gonçalo >> > >> > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... >> > <mailto:ang...@gm...>> wrote: >> > >> > >> > >> > enmach wrote: >> > > >> > > Hi, >> > > >> > > I copied the 2.6.34 kernel with Caspa driver into overo-2011.03. >> The >> > > MT9V032 driver found in later kernels is a complete rewrite and, >> > last I >> > > checked, does not yet work with Caspa. >> > > >> > > - >> > > Neil >> > > >> > >> > Hi Neil, >> > >> > Do you know what is the baseline of later kernel upstream that can >> > work with >> > the new driver? >> > >> > What I foresee is that we are moving towards a 2.6.39 or later >> > kernel in the >> > new overo-2011.03 branch but no driver to support the sensor. >> > Falling back >> > to 2.6.34 and its driver is a damper (~~) >> > >> > Is Overo's/Steve's kernel tracking that from TI's or from Linus's >> like I >> > mentioned earlier? or...? >> > >> > Thks in adv. >> > >> > James. >> > >> > -- >> > View this message in context: >> > >> http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html >> > Sent from the Gumstix mailing list archive at Nabble.com. >> > >> > >> > >> ------------------------------------------------------------------------------ >> > AppSumo Presents a FREE Video for the SourceForge Community by Eric >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup >> > Secrets Revealed." This video shows you how to validate your ideas, >> > optimize your ideas and identify your business strategy. >> > http://p.sf.net/sfu/appsumosfdev2dev >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> > <mailto:gum...@li...> >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > >> > >> > >> > >> > -- >> > .::Gonber::. >> > >> > >> > >> > >> ------------------------------------------------------------------------------ >> > AppSumo Presents a FREE Video for the SourceForge Community by Eric >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup >> > Secrets Revealed." This video shows you how to validate your ideas, >> > optimize your ideas and identify your business strategy. >> > http://p.sf.net/sfu/appsumosfdev2dev >> > >> > >> > >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> >> ------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > > > -- > .::Gonber::. > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- .::Gonber::. |
From: Neil M. <ne...@gu...> - 2011-07-14 19:53:58
|
I pushed a fix for the boot splash issue earlier today. The Caspa kernel should build now. As Marius suggested, if you want to use the Caspa kernel with the latest rootfs you'll have to change the console to ttyS2. You can change this line in overo-oe/org.openembedded.dev/conf/machine/overo.conf SERIAL_CONSOLE = "115200 ttyS2" and then rebuild the affected packages, or just use the rootfs here http://cumulus.gumstix.org/images/angstrom/misc/caspapx/ - Neil On 11-07-14 09:39 AM, Marius Adaskevicius wrote: > I'm not exactly familiar with any of this, but it seems that the image > expects newer kernel. What I believe the issue here is the (in)famous > console switch from ttyS2 in 2.6.34 kernel to ttyO2 in >=2.6.36 kernels. > The change in /etc/inittab from "S:2345:respawn:/sbin/getty 115200 > ttyO2" to "S:2345:respawn:/sbin/getty 115200 ttyS2" should make it boot > (or rather open the terminal) again. Hope that helps. > > Regards, > Marius. > > > On 2011.07.14, at 12:53, Gonçalo Bernardo wrote: > >> ok, here go my attempts' descriptions: >> >> 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch >> >> Error: No such file or directory: >> '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' >> I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it worked >> >> 2) bitbake omap3-console-image from overo-2011.03 branch >> >> 3) Put everything on the microSD, including replacing the contents of >> /boot by the uImage generated for linux-omap3-caspapx. >> >> Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 >> minutes" >> >> Now I can think of 2 possibilities: >> >> a) BOOT_SPLASH is needed >> >> b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. >> >> Do you have any suggestions? >> >> Tks in adv, >> gonçalo >> >> >> On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu... >> <mailto:ne...@gu...>> wrote: >> >> Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb >> <http://linux-omap3-caspapx_2.6.34.bb/> >> >> This recipe came from the Overo branch. >> >> - >> Neil >> >> >> On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: >> > Hey, >> > >> > @Neil, >> > What do you mean by copying? Which files did you replace? >> > From where did you download that kernel? >> > >> > Thanks, >> > gonçalo >> > >> > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... >> <mailto:ang...@gm...> >> > <mailto:ang...@gm... <mailto:ang...@gm...>>> wrote: >> > >> > >> > >> > enmach wrote: >> > > >> > > Hi, >> > > >> > > I copied the 2.6.34 kernel with Caspa driver into >> overo-2011.03. The >> > > MT9V032 driver found in later kernels is a complete rewrite and, >> > last I >> > > checked, does not yet work with Caspa. >> > > >> > > - >> > > Neil >> > > >> > >> > Hi Neil, >> > >> > Do you know what is the baseline of later kernel upstream that can >> > work with >> > the new driver? >> > >> > What I foresee is that we are moving towards a 2.6.39 or later >> > kernel in the >> > new overo-2011.03 branch but no driver to support the sensor. >> > Falling back >> > to 2.6.34 and its driver is a damper (~~) >> > >> > Is Overo's/Steve's kernel tracking that from TI's or from >> Linus's like I >> > mentioned earlier? or...? >> > >> > Thks in adv. >> > >> > James. >> > >> > -- >> > View this message in context: >> > >> http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html >> > Sent from the Gumstix mailing list archive at Nabble.com >> <http://Nabble.com>. >> > >> > >> > >> ------------------------------------------------------------------------------ >> > AppSumo Presents a FREE Video for the SourceForge Community by Eric >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup >> > Secrets Revealed." This video shows you how to validate your ideas, >> > optimize your ideas and identify your business strategy. >> > http://p.sf.net/sfu/appsumosfdev2dev >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> <mailto:gum...@li...> >> > <mailto:gum...@li... >> <mailto:gum...@li...>> >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > >> > >> > >> > >> > -- >> > .::Gonber::. >> > >> > >> > >> > >> ------------------------------------------------------------------------------ >> > AppSumo Presents a FREE Video for the SourceForge Community by Eric >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup >> > Secrets Revealed." This video shows you how to validate your ideas, >> > optimize your ideas and identify your business strategy. >> > http://p.sf.net/sfu/appsumosfdev2dev >> > >> > >> > >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> <mailto:gum...@li...> >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> ------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> <mailto:gum...@li...> >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> >> >> -- >> .::Gonber::. >> ------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev_______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > > > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |
From: Gonçalo B. <gon...@gm...> - 2011-07-18 07:58:26
|
here is the complete procedure that i used to solve the problem. note that this can happen to not be the minimal number of steps. Step 7 is important even if you're not working with the camera but somehow you want to use kernel 2.6.34 with a 2.6.39 image. i hope it is clear. if not just post your questions and i'll try to answer. regards, gonçalo 1) $ git clone git://gitorious.org/gumstix-oe/mainline.git org.openembedded.dev $ cd org.openembedded.dev $ git checkout --track -b xyz origin/overo-2011.03 2) In conf/machine/overo.conf edit the line: SERIAL_CONSOLE = "115200 ttyS2" 3) $ bitbake -c menuconfig linux-omap3-caspapx > left out stuff that I don't need > in my case I needed SPI support and so disabled all touchscreen and LCD display stuff because from what i've read they use the same pins > added mt9v032 in the kernel, not as a module $ cp ~/overo-oe/tmp/work/overo-angstrom-linux-gnueabi/linux-omap3-caspapx-2.6.34-r101/git/.config ~/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx/overo/defconfig $ bitbake -c clean linux-omap3-caspapx $ bitbake linux-omap3-caspapx 4) $ bitbake omap3-console-image > in my case i added some features in the recipe. in particular ffmpeg and mplayer. 5) Load de microSD card 6) Boot board. It takes some time. It fails to boot. 7) Put the microSD card back in the development machine and in /etc/inittab of the root filesystem Edit the line: S:2345:respawn:/sbin/getty 115200 ttyO2 to: S:2345:respawn:/sbin/getty 115200 ttyS2 8) Boot board. You're ready to go. Try for instance $ mplayer tv:// -tv driver=v4l2:device=/dev/video0 -vo jpeg if you added mplayer to the image On Thu, Jul 14, 2011 at 9:53 PM, Neil MacMunn <ne...@gu...> wrote: > I pushed a fix for the boot splash issue earlier today. The Caspa kernel > should build now. > > As Marius suggested, if you want to use the Caspa kernel with the latest > rootfs you'll have to change the console to ttyS2. You can change this > line in overo-oe/org.openembedded.dev/conf/machine/overo.conf > > SERIAL_CONSOLE = "115200 ttyS2" > > and then rebuild the affected packages, or just use the rootfs here > > http://cumulus.gumstix.org/images/angstrom/misc/caspapx/ > > - > Neil > > > > On 11-07-14 09:39 AM, Marius Adaskevicius wrote: > > I'm not exactly familiar with any of this, but it seems that the image > > expects newer kernel. What I believe the issue here is the (in)famous > > console switch from ttyS2 in 2.6.34 kernel to ttyO2 in >=2.6.36 kernels. > > The change in /etc/inittab from "S:2345:respawn:/sbin/getty 115200 > > ttyO2" to "S:2345:respawn:/sbin/getty 115200 ttyS2" should make it boot > > (or rather open the terminal) again. Hope that helps. > > > > Regards, > > Marius. > > > > > > On 2011.07.14, at 12:53, Gonçalo Bernardo wrote: > > > >> ok, here go my attempts' descriptions: > >> > >> 1) bitbake linux-omap3-caspapx from the overo-2011.03 branch > >> > >> Error: No such file or directory: > >> > '/home/gonber/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-caspapx-2.6.34/overo/./${BOOT_SPLASH}' > >> I commented out the BOOT_SPLASH in the recipe and rerun bitbake. it > worked > >> > >> 2) bitbake omap3-console-image from overo-2011.03 branch > >> > >> 3) Put everything on the microSD, including replacing the contents of > >> /boot by the uImage generated for linux-omap3-caspapx. > >> > >> Boot stopped with: "INIT: Id "S" respawning too fast: disabled for 5 > >> minutes" > >> > >> Now I can think of 2 possibilities: > >> > >> a) BOOT_SPLASH is needed > >> > >> b) omap3-console-image expects 2.6.39 and doesn't work with 2.6.34. > >> > >> Do you have any suggestions? > >> > >> Tks in adv, > >> gonçalo > >> > >> > >> On Wed, Jul 13, 2011 at 5:39 PM, Neil MacMunn <ne...@gu... > >> <mailto:ne...@gu...>> wrote: > >> > >> Take a look at recipes/linux/linux-omap3-caspapx_2.6.34.bb > >> <http://linux-omap3-caspapx_2.6.34.bb/> > >> > >> This recipe came from the Overo branch. > >> > >> - > >> Neil > >> > >> > >> On 11-07-13 12:08 AM, Gonçalo Bernardo wrote: > >> > Hey, > >> > > >> > @Neil, > >> > What do you mean by copying? Which files did you replace? > >> > From where did you download that kernel? > >> > > >> > Thanks, > >> > gonçalo > >> > > >> > On Wed, Jul 13, 2011 at 3:15 AM, JamesAng <ang...@gm... > >> <mailto:ang...@gm...> > >> > <mailto:ang...@gm... <mailto:ang...@gm...>>> > wrote: > >> > > >> > > >> > > >> > enmach wrote: > >> > > > >> > > Hi, > >> > > > >> > > I copied the 2.6.34 kernel with Caspa driver into > >> overo-2011.03. The > >> > > MT9V032 driver found in later kernels is a complete rewrite and, > >> > last I > >> > > checked, does not yet work with Caspa. > >> > > > >> > > - > >> > > Neil > >> > > > >> > > >> > Hi Neil, > >> > > >> > Do you know what is the baseline of later kernel upstream that can > >> > work with > >> > the new driver? > >> > > >> > What I foresee is that we are moving towards a 2.6.39 or later > >> > kernel in the > >> > new overo-2011.03 branch but no driver to support the sensor. > >> > Falling back > >> > to 2.6.34 and its driver is a damper (~~) > >> > > >> > Is Overo's/Steve's kernel tracking that from TI's or from > >> Linus's like I > >> > mentioned earlier? or...? > >> > > >> > Thks in adv. > >> > > >> > James. > >> > > >> > -- > >> > View this message in context: > >> > > >> > http://old.nabble.com/Caspa-%28mt9v032%29-camera-kernel-support-tp32032932p32050454.html > >> > Sent from the Gumstix mailing list archive at Nabble.com > >> <http://Nabble.com>. > >> > > >> > > >> > > >> > ------------------------------------------------------------------------------ > >> > AppSumo Presents a FREE Video for the SourceForge Community by > Eric > >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup > >> > Secrets Revealed." This video shows you how to validate your > ideas, > >> > optimize your ideas and identify your business strategy. > >> > http://p.sf.net/sfu/appsumosfdev2dev > >> > _______________________________________________ > >> > gumstix-users mailing list > >> > gum...@li... > >> <mailto:gum...@li...> > >> > <mailto:gum...@li... > >> <mailto:gum...@li...>> > >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users > >> > > >> > > >> > > >> > > >> > -- > >> > .::Gonber::. > >> > > >> > > >> > > >> > > >> > ------------------------------------------------------------------------------ > >> > AppSumo Presents a FREE Video for the SourceForge Community by > Eric > >> > Ries, the creator of the Lean Startup Methodology on "Lean Startup > >> > Secrets Revealed." This video shows you how to validate your > ideas, > >> > optimize your ideas and identify your business strategy. > >> > http://p.sf.net/sfu/appsumosfdev2dev > >> > > >> > > >> > > >> > _______________________________________________ > >> > gumstix-users mailing list > >> > gum...@li... > >> <mailto:gum...@li...> > >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users > >> > >> > >> > ------------------------------------------------------------------------------ > >> AppSumo Presents a FREE Video for the SourceForge Community by Eric > >> Ries, the creator of the Lean Startup Methodology on "Lean Startup > >> Secrets Revealed." This video shows you how to validate your ideas, > >> optimize your ideas and identify your business strategy. > >> http://p.sf.net/sfu/appsumosfdev2dev > >> _______________________________________________ > >> gumstix-users mailing list > >> gum...@li... > >> <mailto:gum...@li...> > >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > >> > >> > >> > >> > >> -- > >> .::Gonber::. > >> > ------------------------------------------------------------------------------ > >> AppSumo Presents a FREE Video for the SourceForge Community by Eric > >> Ries, the creator of the Lean Startup Methodology on "Lean Startup > >> Secrets Revealed." This video shows you how to validate your ideas, > >> optimize your ideas and identify your business strategy. > >> > http://p.sf.net/sfu/appsumosfdev2dev_______________________________________________ > >> gumstix-users mailing list > >> gum...@li... > >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > ------------------------------------------------------------------------------ > > AppSumo Presents a FREE Video for the SourceForge Community by Eric > > Ries, the creator of the Lean Startup Methodology on "Lean Startup > > Secrets Revealed." This video shows you how to validate your ideas, > > optimize your ideas and identify your business strategy. > > http://p.sf.net/sfu/appsumosfdev2dev > > > > > > > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- .::Gonber::. |