We don't have a web proxy in use here. The problem was resolved by
installing a newer version of svn, and then setting a sync option on the
drive that I was trying to use to hold the downloaded files.
> I am having problems checking out the buildroot. Here are some of the
> messages that I am getting:
> [fokumdt@... Handhelds]$ pwd
> [fokumdt@... Handhelds]$ which svn
> [fokumdt@... Handhelds]$ svn co
> http://svn.gumstix.com/gumstix-buildroot/trunk gumstix-buildroot
> svn: REPORT request failed on '/gumstix-buildroot/!svn/vcc/default'
> svn: REPORT of '/gumstix-buildroot/!svn/vcc/default': 400 Bad Request
I get the following message after I try to flash my Gumstix.
U-Boot 1.1.4 (Aug 1 2006 - 10:47:14)
*** Welcome to Gumstix ***
GUM> loadb a2000000
## Ready for binary (kermit) download to 0xA2000000 at 115200 bps...
## Total Size = 0x00000000 = 0 Bytes
## Start Addr = 0xA2000000
GUM> send rootfs.arm_nofpu.jffs2
Unknown command 'send' - try 'help'
What am I doing incorrectly?
From: Dave Hylands <dhylands@gm...> - 2006-12-21 00:33:44
> I get the following message after I try to flash my Gumstix.
> U-Boot 1.1.4 (Aug 1 2006 - 10:47:14)
> *** Welcome to Gumstix ***
> GUM> loadb a2000000
> ## Ready for binary (kermit) download to 0xA2000000 at 115200 bps...
> ## Total Size = 0x00000000 = 0 Bytes
> ## Start Addr = 0xA2000000
> GUM> send rootfs.arm_nofpu.jffs2
> Unknown command 'send' - try 'help'
> What am I doing incorrectly?
The send command is a kermit command not a u-boot command. I haven't
used kermit, but the wiki says:
Now, send your filesystem image. In Kermit/cKermit, press
Ctrl-backslash and then c to access the control prompt, and type send
So it would appear that you're typing the command at the uboot prompt
rather than giving it to kermit.
Vancouver, BC, Canada