I was wondering if Steve's method of booting from SD/MMC
works for Basix boards. It appears that most people trying it out are on
I've formatted the card with FAT16/ext2, and uboot reads the uImage fine and
the kernel starts booting. I'm using the gumstix-factory.script on in the
kernel-mmc package, so my bootargs are: console=ttyS0,115200n8 rootdelay=1
When it comes time to mount the root I get the following:
Waiting 1sec before mounting root device...
mmcblk0: mmc0:b368 SMI 975360KiB (ro)
mmcblk0: p1 p2
VFS: Cannot open root device "mmcblk0p2" or unknown-block(254,2)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
Here's what I've tried (in order):
1. Copying the linux package into user.collection, modifying the defconfig
for basix and rebuilding gumstix-kernel
2. Uncommenting the MACHINE_FEATURES += "mmc" (and then rebase, rebuild
3. Going into com.gumstix.collection and changing the basix defconfig to
enable built in MMC, ext2, and rebuild the kernel.
I'm pretty sure it isn't the card, because if I get uboot to boot using the
onboard flash, the gumstix automounts both partitions on the SD card fine.
View this message in context: http://www.nabble.com/SD-Card-booting-on-Basix-tp20615629p20615629.html
Sent from the Gumstix mailing list archive at Nabble.com.