Hi guys. I just wanted to share my knowlage on this subject.
If anyone is using Microwindows and wants to use the SC3 Touchscreen
controller & it's Driver then . Don't. This models are absolete and not sold
anywhere else except from Earth LCD. They have an issue with Microwindows.
The Driver is set to 9600 serial Speed and the controllers are preprogrammed
to 2400. If you change the settings in the driver then it simply won't work.
Instead use another controller (I used the TSHARC-XX Devil Ray) This
controllers are preprogrammed to 9600 and if you use the Driver for SC3
Microtouch then they work like a charm.
Anyway. I think that there aren't many people with this problem but if there
are then here is your answer :-)
I hope I helped. It sure would of saved me allot of time if I knew this from