I'm very new to this and have some questions about doing this cross-compile.
The instructions I started with suggested I apt-get on the gumstix to get
xerces as cross compiling was not necessary if I did that. However, I have
Angstrom on my Overo and I cannot apt-get.
I have, alternatively to cross-compile on my linux machine:
./configure CC=arm-none-linux-gnueabi-gcc CXX=arm-none-linux-gnueabi-g++
make && make install
where "path to tool chain" is the path to my cross-compiler. Where I cam
confused is where the xerces install dir comes in. According to the
instructions, this should be a copy of the installed include and libs
folders from the gumstix. But since I cannot install directly to the
Gumstix, what should this path be? I think it has to do with specific
libraries that I want, but I'm not sure. I want to install libxerces-c2-dev
and libxerces-c28 on my Gumstix.
Again, very new to cross-compiling and could use some pointers.
View this message in context: http://gumstix.8.n6.nabble.com/Cross-Compiling-Xerces-for-Gumstix-tp4964565.html
Sent from the Gumstix mailing list archive at Nabble.com.