When building using the omap3-console-image for overo, it defaults to using
the 3.0 kernel
Problem is that the display system is not properly initialized... (no
The output whilst booting:
Kernel command line: console=ttyO2,115200 mpurate=500 vram=12M
omapfb.mode=dvi:1024x768MR-16@... omapfb.debug=y omapdss.def_disp=lcd43
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
clock: disabling unused clocks to save power
omapfb omapfb: no driver for display
omapfb omapfb: failed to setup omapfb
Now I've checked some other posts on older kernels, but am not able to find
a solution there, I don't see much reference to the new kernel version. I
have checked my kernel config, which does include the generic_dpi_panel
What I would like to know:
- is anyone familiar with this issue on the 3.0 linux version?
- can I change to use an older kernel which does work? (which version would
be the best candidate?)
- could it have anything to do with omaplfb (ti sgx stuff not being
any pointers are welcome!
View this message in context: http://gumstix.8.n6.nabble.com/Problem-linux-omap3-3-0-omapfb-no-driver-for-display-tp3665092p3665092.html
Sent from the Gumstix mailing list archive at Nabble.com.