... ...

2008/6/26 Xiang Zhou <xzhou@tcd.ie>:
Hi Crhis,


You rock,
That 's it, I can login in now, Thanks a lot.


Xiang

2008/6/26 Chris Dollar <chris.dollar@gmail.com>:
> You will probably need to rebuild your kernel and reflash it. You might even
> need to rebuild the entire filesystem and flash it as well, but lets start
> with the kernel. So from where you installed gumstix-oe run 'bitbake -c
> rebuild gumstix-kernel'. This will build you a new uImage, which you need to
> flash to your gumstix. Give that a try and let us know if it does/doesn't
> work for you.
>
> Chris
> On Thu, Jun 26, 2008 at 2:47 PM, XiangZ <xzhou@tcd.ie> wrote:
>>
>> Hi Chris,
>>
>> Thanks for the help. After your advice I have followed that list and did
>> again. I have Run "sudo dpkg-reconfigure dash" and answered No.  (reboot
>> the
>> desktop and rebuild the image.)
>> After I reload the image and kernel , it still hanging at the same place.
>>
>> did I missing some steps?
>>
>>
>> Xiang
>>
>>
>>
>> Chris Dollar wrote:
>> >
>> > Check that you don't have /bin/sh linked to /bin/dash as is noted on
>> > this
>> > page
>> >
>> > http://www.gumstix.net/Software/view/Getting-started/Setting-up-a-build-environment/111.html.
>> > Having the dash link will cause it to hang at 'freeing init memory'.
>> >
>> > Chris
>> >
>> > On Thu, Jun 26, 2008 at 1:15 PM, XiangZ <xzhou@tcd.ie> wrote:
>> >
>> >>
>> >> Hello,
>> >>
>> >> I am using gumstix connex400xm. After I using OpenEmbedded bitbake to
>> >> make
>> >> a
>> >> new image and kernel. I used serial connection to upload  both on to
>> >> the
>> >> gumstix , then it just won't reboot. It is doing something , but then
>> >> hanging before the login.
>> >>
>> >> I was following procedure on the openembedded site to do the rebuild
>> >> and
>> >> uploading. I have tried a few time , but it still the same.  I can use
>> >> "ls
>> >> "
>> >> to check the file system.
>> >>
>> >> I want to know if anyone had similar problem ?
>> >>
>> >> Here is the message:
>> >>
>> >>
>> >> U-Boot 1.2.0 (Aug 30 2007 - 13:21:47) - 400 MHz - 1513
>> >>
>> >> *** Welcome to Gumstix ***
>> >>
>> >> DRAM:  64 MB
>> >> Flash: 16 MB
>> >> Using default environment
>> >>
>> >> SMC91C1111-0
>> >> Net:   SMC91C1111-0
>> >> Hit any key to stop autoboot:  0
>> >> Instruction Cache is ON
>> >> Copying kernel to 0xa2000000 from 0x00f00000 (length 0x00100000)...done
>> >> ## Booting image at a2000000 ...
>> >>   Image Name:   Angstrom/2.6.21/gumstix-custom-c
>> >>   Image Type:   ARM Linux Kernel Image (uncompressed)
>> >>   Data Size:    1038444 Bytes = 1014.1 kB
>> >>   Load Address: a0008000
>> >>   Entry Point:  a0008000
>> >> OK
>> >>
>> >> Starting kernel ...
>> >>
>> >> Linux version 2.6.21 (xzhou@XiangZhou) (gcc version 4.1.2) #1 PREEMPT
>> >> Sat
>> >> Jun 21 22:08:52 IST 2008
>> >> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
>> >> Machine: The Gumstix Platform
>> >> Memory policy: ECC disabled, Data cache writeback
>> >> Memory clock: 99.53MHz (*27)
>> >> Run Mode clock: 398.13MHz (*4)
>> >> Turbo Mode clock: 398.13MHz (*1.0, inactive)
>> >> CPU0: D VIVT undefined 5 cache
>> >> CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
>> >> CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
>> >> Built 1 zonelists.  Total pages: 16256
>> >> Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2
>> >> reboot=cold,hard
>> >> PID hash table entries: 256 (order: 8, 1024 bytes)
>> >> Console: colour dummy device 80x30
>> >> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
>> >> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
>> >> Memory: 64MB = 64MB total
>> >> Memory: 62720KB available (1872K code, 193K data, 144K init)
>> >> Mount-cache hash table entries: 512
>> >> CPU: Testing write buffer coherency: ok
>> >> NET: Registered protocol family 16
>> >> Time: pxa_timer clocksource has been installed.
>> >> NET: Registered protocol family 2
>> >> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>> >> TCP established hash table entries: 2048 (order: 2, 16384 bytes)
>> >> TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
>> >> TCP: Hash tables configured (established 2048 bind 2048)
>> >> TCP reno registered
>> >> JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
>> >> io scheduler noop registered
>> >> io scheduler cfq registered (default)
>> >> Console: switching to colour frame buffer device 80x24
>> >> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
>> >> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
>> >> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
>> >> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
>> >> Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit
>> >> bankwidth)
>> >> Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
>> >>  Intel/Sharp Extended Query Table at 0x0031
>> >> Using buffer write method
>> >> cfi_cmdset_0001: Erase suspend on write enabled
>> >> Using static partitions on Gumstix Flash ROM
>> >> Creating 3 MTD partitions on "Gumstix Flash ROM":
>> >> 0x00000000-0x00040000 : "Bootloader"
>> >> 0x00040000-0x00f00000 : "RootFS"
>> >> 0x00f00000-0x01000000 : "Kernel"
>> >> TCP cubic registered
>> >> NET: Registered protocol family 1
>> >> NET: Registered protocol family 17
>> >> XScale DSP coprocessor detected.
>> >> VFS: Mounted root (jffs2 filesystem).
>> >> Freeing init memory: 144K
>> >>
>> >>
>> >>
>> >>
>> >> --
>> >> View this message in context:
>> >>
>> >> http://www.nabble.com/OpenEmbedded-Bitbake-image-for-connex-tp18141258p18141258.html
>> >> Sent from the Gumstix mailing list archive at Nabble.com.
>> >>
>> >>
>> >>
>> >> -------------------------------------------------------------------------
>> >> Check out the new SourceForge.net Marketplace.
>> >> It's the best place to buy or sell services for
>> >> just about anything Open Source.
>> >> http://sourceforge.net/services/buy/index.php
>> >> _______________________________________________
>> >> gumstix-users mailing list
>> >> gumstix-users@lists.sourceforge.net
>> >> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>> >>
>> >
>> >
>> > -------------------------------------------------------------------------
>> > Check out the new SourceForge.net Marketplace.
>> > It's the best place to buy or sell services for
>> > just about anything Open Source.
>> > http://sourceforge.net/services/buy/index.php
>> > _______________________________________________
>> > gumstix-users mailing list
>> > gumstix-users@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/gumstix-users
>> >
>> >
>>
>> --
>> View this message in context:
>> http://www.nabble.com/OpenEmbedded-Bitbake-image-for-connex-tp18141258p18142363.html
>> Sent from the Gumstix mailing list archive at Nabble.com.
>>
>>
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://sourceforge.net/services/buy/index.php
>> _______________________________________________
>> gumstix-users mailing list
>> gumstix-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Xusheng Hou
Mobile and Ubiquitous Computing
Computer Science
Trinity College Dublin

Mobile: 086-845-9180
29 Westfield Road, Harold Cross, Dublin 6W