Hi, yeah, the above was the dmesg output. Now my lsusb is working by the way. Again, for quicker reference, dmesg says:

usb 1-2: new low speed USB device using pxa27x-ohci and address 2              
usb 1-2: configuration #1 chosen from 1 choice

Or do you need something else from dmesg?
Also, lsusb says:

Bus 001 Device 002: ID 046d:c219 Logitech, Inc.                                
Bus 001 Device 001: ID 0000:0000               

Are these the major/minor #s?
This is what lsusb says on my laptop, where joysticks work, so I figure something's working. Still, SDL can't recognize my joystick.

Thanks

On 7/19/07, Marc Nicholas <geekything@gmail.com> wrote:
Type "dmesg" on the commandline and reply with the output from that
and we will take a peek.

-marc


On 7/19/07, Patrick Gallagher <pgallagher@stanford.edu > wrote:
> Hi, I'm pretty new to this, and I don't really know what my dmesg is telling
> me :)
> When I plug in the device and pull it out, it says this every time:
> usb 1-2: new low speed USB device using pxa27x-ohci and address
> 4
> usb 1-2: configuration #1 chosen from 1
> choice
> usb 1-2: USB disconnect, address 4
> Does that say anything? And for some reason, yesterday lsusb was giving me
> something and today it isn't. Today it thinks that /proc/bus/usb/devices
> doesn't exist (it doesn't). I'm pretty confused about it. Maybe someone has
> some insight :)
> Thanks
>
> On 7/19/07, Jeff Sadowski < jeff.sadowski@gmail.com> wrote:
> >
> > Does dmesg show you the major and minor numbers of the js?
> > you can create the device node using that information.
> >
> > On 7/18/07, Patrick Gallagher < pgallagher@stanford.edu> wrote:
> > > hi, I'm trying to get my usb joystick to be recognized by gumstix. When
> > I do
> > > lsusb, it recognizes that there's a logitech device in the port. I want
> > to
> > > make SDL (which is what I'm trying to use the joystick with) recognize
> > that
> > > there is a joystick in the usb drive--right now it doesnt. I think I
> > need
> > > something to show up as /dev/input/js0, but currently I have nothing in
> > > /dev/input. I feel like getting usbhid will solve it, since that's what
> > gets
> > > loaded when I plug in my device to other computer. Does anyone know how
> > I
> > > can get usbhid on to my gumstix? Or does anyone have a different
> > solution
> > > for using joysticks on gumstix? I have a verdex 600mhz with console and
> > > netCF.
> > > Thanks
> > >
> > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by DB2 Express
> > > Download DB2 Express C - the FREE version of DB2 express and take
> > > control of your XML. No limits. Just data. Click to get it now.
> > > http://sourceforge.net/powerbar/db2/
> > > _______________________________________________
> > > gumstix-users mailing list
> > > gumstix-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> > >
> > >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > gumstix-users mailing list
> > gumstix-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> >
>

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users