I don’t use that build system – so I probably should stay out of this …

 

…But that being said … maybe it’s just a PATH problem or you don’t have that toolchain installed… ?

 

I would suggest searching your drive for it.. something like:

 

find / -n arm-poky-linux-gnueabi-gcc

 

and then if you find that check the directory you find the file in is in your PATH by:

 

echo $PATH

 

if it isn’t in the PATH – add it..

 

If you can’t find the file on the system… then I’m not sure what package you need to install.

 

Hope this helps …

 

Ben

 

From: Nick Wernicke [mailto:nick.wernicke@gmail.com]
Sent: Wednesday, 7 November 2012 10:59 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

So, I am able to build everything except ti-dsplink.  I think it has something to do with this error:

make[1]: /arm-poky-linux-gnueabi-gcc: Command not found

To test, I built the poky meta-toolchain image and added the arm-poky-linux-gnueabi folder to my path.  When I entered the same commands from the bitbake log file, it compiled like it was supposed to.

When I type in console "/arm-poky-linux-gnueabi-gcc" it says "Command not found"
When I type in console "arm-poky-linux-gnueabi-gcc" it says it needs a file.  If I add the options and file from the bitbake log, it compiles.

So I think the cause of the problem is the / in front of the arm.  My issue is that I have no way to fix this.  Maybe I need to edit the compiler variable?


On Tue, Nov 6, 2012 at 3:57 PM, Richard Klosinski <rich@klo-group.com> wrote:

yep. I built jumpnow-console-image w/o failure. 

 

 


From: Nick Wernicke [nick.wernicke@gmail.com]
Sent: Tuesday, November 06, 2012 2:53 PM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

Your MACHINE=overo right?

On Tue, Nov 6, 2012 at 2:31 PM, Richard Klosinski <rich@klo-group.com> wrote:

I've gone the meta-ti route, and with not much luck. Done the following:

 

got meta-ti at git clone git://git.yoctoproject.org/meta-ti

cd meta-ti

git checkout -b denzil origin/denzil

added it to the poky/build/conf/bblayers.conf

BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/" added to poky/build/conf/local.conf

 

and it fails with the following:

| /tmp/cc0VzI7d.s: Assembler messages:

| /tmp/cc0VzI7d.s:463: Error: selected processor does not support ARM mode `smc #0'

| /tmp/cc0VzI7d.s:524: Error: selected processor does not support ARM mode `smc #0'

 

just shoot me.

 


From: Nick Wernicke [nick.wernicke@gmail.com]
Sent: Tuesday, November 06, 2012 2:26 PM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

I was hoping I could bitbake gstreamer-ti by itself, with the ipk option and the machine set to overo in  local.conf, then copy it over and install it with opkg.  Sadly, it does not appear that this recipe works.  I keep getting the same error.  I don't have any idea what this means, or what I would do to fix it.

| echo Compiling CFG_system.c...
| Compiling CFG_system.c...
| /arm-poky-linux-gnueabi-gcc -g -DOS_LINUX -DMAX_DSPS=1 -DMAX_PROCESSORS=2 -DID_GPP=1 -DOMAP3530 -DPROC_COMPONENT -DPOOL_COMPONENT -DNOTIFY_COMPONENT -DMPCS_COMPONENT -DRINGIO_COMPONENT -DMPLIST_COMPONENT -DMSGQ_COMPONENT -DMSGQ_ZCPY_LINK -DCHNL_COMPONENT -DCHNL_ZCPY_LINK -DZCPY_LINK -DKFILE_DEFAULT -DOMAP3ERROR: Function failed: do_compile (see /home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/temp/log.do_compile.32690 for further information)
| 530 -DOMAP3530_PHYINTERFACE=SHMEM_INTERFACE -DGPP_SWI_MODE -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/inc -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/inc/usr -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/inc/sys/Linux -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/inc/sys/Linux/2.6.18 -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/src/api -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/src/api/Linux -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/src/api/Linux/2.6.18 -I/home/nick/toolchains/git/arm-2009q1-203/arm-none-linux-gnueabi/libc/usr/include -I/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/BUILD/INCLUDE/USER -I/home/nick/toolchains/git/arm-2009q1-203/arm-none-linux-gnueabi/libc/usr/include -Wall -c   -D_REENTRANT -DTRACE_USER -DDDSP_DEBUG -DKBUILD_BASENAME=CFG_system -o/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/BUILD/API/OBJ/DEBUG/CFG_system.o /home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/config/BUILD/CFG_system.c
| make[1]: /arm-poky-linux-gnueabi-gcc: Command not found
| make[1]: *** [/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/config/BUILD/CFG_system.c.deb] Error 127
| make[1]: Leaving directory `/home/nick/oe-yocto/poky/build/tmp/work/overo-poky-linux-gnueabi/ti-dsplink-1_1_65_00_03-r1j/dsplink_linux_1_65_00_03/dsplink/gpp/src/api'
| make: *** [objdeb] Error 2
NOTE: package ti-dsplink-1_1_65_00_03-r1j: task do_compile: Failed
ERROR: Task 267 (/home/nick/oe-yocto/poky/meta-ti/recipes-ti/dsplink/ti-dsplink_1.65.00.03.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 546 tasks of which 545 didn't need to be rerun and 1 failed.

On Tue, Nov 6, 2012 at 10:53 AM, Richard Klosinski <rich@klo-group.com> wrote:

i followed that tutorial when i used the oe-bitbake tools. 

 

Using the poky method, its a bit different, i think. I downloaded the meta-ti, but Im still trying to figure out how to add the meta-ti to the jumpnow-console-image.

 

 


From: Nick Wernicke [nick.wernicke@gmail.com]
Sent: Tuesday, November 06, 2012 10:47 AM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

Jumpnowdev has an awesome tutorial.  I followed it, but I run into this problem when building gstreamer-ti.

| make[1]: /arm-poky-linux-gnueabi-gcc: Command not found

I think that it is because I need to install the correct toolchain and/or add it to my path.  I don't have any toolchains installed on my machine, and I don't really know what toolchain to get. Is there instructions?

On Tue, Nov 6, 2012 at 8:46 AM, Richard Klosinski <rich@klo-group.com> wrote:

Nope. Did not. 

 

Found meta-ti @ git://git.yoctoproject.org/meta-ti

 

Now, where to I add it to get built into jumpnow-console-image? 

 

Also, Im still trying to figure out how the version is picked. I see in meta-jumpnow/recipes-kernel/linux references to linux-sakoman-3.2, but I do not know if I should replace all with linux-sakoman-3.6 or is there a more elegant way of doing so.

 

 

 

 


From: Chris Whittenburg [whittenburg@gmail.com]
Sent: Tuesday, November 06, 2012 8:14 AM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

Do you have the meta-ti layer?  It contains gstreamer-ti, which then will include all the dsp dependencies.
 

 

On Tue, Nov 6, 2012 at 8:34 AM, Adam Lee <adam@gumstix.com> wrote:

Hi Rich, check the machine configuration file. Look for overo.inc (not sure exactly where it is off the top of my head). Also the available kernels are found in recipes-kernel I believe.

Adam

 

On Tue, Nov 6, 2012 at 6:04 AM, Richard Klosinski <rich@klo-group.com> wrote:

The build just completed, but I do not see the dsp drivers in the build. I also noticed that the build is 3.2. Im sure there is a setting somewhere that is similar to the oe build system to allow setting of the kernel.

 

rich

 

From: Nick Wernicke [mailto:nick.wernicke@gmail.com]
Sent: Monday, November 05, 2012 9:06 PM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

I am also building my first yocto image (jumpnow-console-image)! I guess I don't know what all is in here, do I need to add the meta-ti layer, or any other layer, to add in ti specific hardware dsp functions?

On Mon, Nov 5, 2012 at 4:49 PM, rklosinski <rich@klo-group.com> wrote:

Thanks. Got everything set up using the guide in from jumpnowtek. doing a test build now.....


From: Adam Lee [via Gumstix] [ml-node+[hidden email]]
Sent: Monday, November 05, 2012 4:05 PM
To: Richard Klosinski
Subject: Re: Yocto Questions

Fantastic. Let us know how it goes!

On Mon, Nov 5, 2012 at 3:55 PM, Richard Klosinski <[hidden email]> wrote:

Im looking for dsp/gstreamer support and tvp5150. I think it should work in 3.5 (I hope at least).

 

Rich


From: Adam Lee [[hidden email]]


Sent: Monday, November 05, 2012 3:55 PM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

Yes Yocto is our new build system, but at the moment it only supports Kernel 3.2 and 3.5 (meaning it does not support features you may need such as SGX). Of course, if you are comfortable with the build system, you can make it work with the older kernels. 

 

If you absolutely need Kernel 2.6, OpenEmbedded is still valid. 

 

Adam

On Mon, Nov 5, 2012 at 3:06 PM, Richard Klosinski <[hidden email]> wrote:

thanks. nuking in progress.


From: Tyler Jones [[hidden email]]


Sent: Monday, November 05, 2012 2:50 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Yocto Questions

 

Yes, Yocto is the new build system.


-Tyler Jones

On 5 November 2012 14:31, rklosinski <[hidden email]> wrote:

Is Yocto a total replacement for the old build system? Im asking because I
want to use yocto, but the existing gumstix bitbake-openembedded system is
sucking up my drive and I would like to nuke it all.



--
View this message in context: http://gumstix.8.n6.nabble.com/Yocto-Questions-tp4965916.html
Sent from the Gumstix mailing list archive at Nabble.com.

------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list

[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list

[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list

[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list

[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users


If you reply to this email, your message will be added to the discussion below:

http://gumstix.8.n6.nabble.com/Yocto-Questions-tp4965916p4965923.html

To unsubscribe from Yocto Questions, click here.
NAML

 


View this message in context: RE: Yocto Questions


Sent from the Gumstix mailing list archive at Nabble.com.


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users



______________________________________________________________________
CAUTION: This message was sent via the Public Internet and its authenticity cannot be guaranteed.


PROPRIETARY: This e-mail contains proprietary information some or all of which may be legally privileged. It is intended for the recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the authority by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.