Does the 3.5 kernel have support for the tvp5151 and gstreamer? 



From: Chris Whittenburg [whittenburg@gmail.com]
Sent: Monday, November 05, 2012 9:31 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] TVP514X support on gumstix


We use the tvp5151 with an overo for NTSC capture with the 3.5 kernel.  The nice thing about the 5151 is that it doesn't require level shifters.

We made a few small changes to the tvp5150 driver to work with the 5151.

If I remember right, the bt656 patches for the OMAP isp driver came from Laurent Pinchart's repo. [1].

Everything works with gstreamer just fine, although the video still shows the interlacing artifacts/ghosting during high motion.

I would be willing to come up with a tvp5151 board which could connect via ribbon to the overo if there is enough interest. 

Laurent has suggested before that if he had test hardware which supported bt656, we would get better support for it.

1. http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp/bt656

regards,
Chris





On Mon, Nov 5, 2012 at 9:45 AM, rklosinski <rich@klo-group.com> wrote:
I found the .c and .h files. I getting them into the build is what is a
mystery to me.



--
View this message in context: http://gumstix.8.n6.nabble.com/TVP514X-support-on-gumstix-tp4965895p4965899.html
Sent from the Gumstix mailing list archive at Nabble.com.

------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users