Q: Any news on what J4-46 (4030GP2_N_MMC3_CD) is supposed to be?
A: This is the Card Detect signal for MMC3. It comes from the PMIC

The I/O information posted at gumstix.net has been updated.

Don
==========

On Thu, Apr 23, 2009 at 6:17 PM, R. P. McMurphy <loginreg@gmail.com> wrote:
Thanks for the update. I was previously wondering about the J1-8 and
now I can see why I could not get it working.

Any news on what J4-46 (4030GP2_N_MMC3_CD) is supposed to be?



On 4/24/09, Don Anderson <don@gumstix.com> wrote:
> Please note that the labeling for two pins on connector J1, as posted in the
> documentation section of gumstix.net, have been corrected.
>
>  -  Pin 8 was incorrectly labeled as GPIO127_TS_IRQ. Pin 8 is now correctly
> labeled as GPIO_10
>
> - Pin 14 was incorrectly labeled as GPIO128_GPS_PPS. Pin 14 is now correctly
> labeled as GPIO_186
>
> The posting of this information can be found here:
> http://www.gumstix.net/Hardware/view/Motherboard-I/O/Connector-J1-for-Overo/112.html
>
>
> Don
> @ Gumstix
> =========================
>