hi
yes i set seperate ips for the two

for the gumstix i use 10.xxx

and i still cant ssh into gumstix . now the new error says the network is down

but i can ping the gumstix from host now

don



On Jan 10, 2008 10:12 PM, Donny George <donny008@gmail.com> wrote:
when i was rebooting the gumstix to see the usb0 entry. i saw that at the end it shows sshd segmentation fault

does this mean i cant ssh into the gumstix




On Jan 10, 2008 8:58 PM, Heilpern, Mark < mark.heilpern@authentec.com> wrote:

I presume he gave you http://www.davehylands.com/linux/gumstix/usbnet/linux.inf ? It opens in a new page but the data it shows is valid, just put it into a file.

 

Alternatively, you could google linux.inf and the first link will be the one I just pasted. From there, you can right-click the link and choose to save it rather than open it.

 

From: gumstix-users-bounces@lists.sourceforge.net [mailto:gumstix-users-bounces@lists.sourceforge.net] On Behalf Of Donny George
Sent: Thursday, January 10, 2008 2:13 PM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Fwd: gpsstix with cygwin

 

hi

is there any place to get the linux.inf file for windows. i tried the hylands link but it just opens as a new page for me.

don

On Jan 10, 2008 5:49 PM, Tim Redfern < gumstix@eclectronics.org> wrote:

Hi do you have a clash with the ip addresses your pc is using for
ethernet?

if you type ifconfig eth0 on your pc what does it say?

personally, I am using 192.168.1.x for ethernet and 10.0.0.x for usbnet

Tim



On Thu, 2008-01-10 at 17:36 +0100, Donny George wrote:
> hello
>
> finally i have the usb0 entry when i type in ifconfig
>
> and then according to wiki of testing the connection, and once i typed
> in ssh root@192.168.0.2-it says connection to host 192.168.0.2 port
> 22:connection timed out
>
> then as part of trouble shooting i did ssh localhost and it asked for
> password and i entered the roots password and that worked fine.
>
> but i couldnt find anything related to port 22 other than a page
> saying that there might be a firewall.
>
> this was the same error i got when i tried to ssh with windows at the
> firs instance a week back
>
> i tried to google port 22 connection timed out with ssh and i couldnt
> find anything meaningful
> i also tried http ing its not a success either
>
> and then i moved on to windows and set up usb there on the host and
> the gumstix. and http ed the ip of gumstix and it didnt connect. then
> i tried pinging the host from the gumstix and it said network
> unreachable
>
> now i am at bay not knowing where i went wrong. the ultimate aim was
> to make the gumstix connection to an internet website and listen to
> music. and the stack was audiostix, wifistix and connex board, am i
> going in the right direction. kindly help
>
> thankyou for all the help so far
>
>
>
> don
>
>
>
>
>
> On 1/9/08, Tim Redfern <gumstix@eclectronics.org> wrote:
>         hi donny..
>
>         so you have got the entry in /etc/network/interfaces on the
>         gumstix,
>         like this?:
>
>         auto usb0
>         iface usb0 inet static
>                  address 192.168.0.2
>                  netmask 255.255.255.0
>                  pre-up /sbin/modprobe g_ether;/sbin/modprobe
>         af_packet
>                  post-down /sbin/modprobe -r g_ether
>
>
>         and when you type ifconfig on the gumstix, you don't see an
>         entry for
>         usb0?
>
>         what happens when you type 'ifup usb0' ?
>
>         can you see the ethernet gadget being initialised in the
>         startup
>         sequence when you boot the gumstix?
>
>         when you say 'should i manually configure ip'- you have. the
>         one thing
>         you may have to change is to choose a different range of
>         addresses if
>         your pc uses 192.168.0.x anyway.
>
>         T
>
>         On Tue, 2008-01-08 at 15:12 +0100, Donny George wrote:
>         > hi
>         >
>         > yes i added auto usb0 too and still with ifconfig it doesnt
>         show the
>         > usb0 entry
>         >
>         > should i manually configure ip or something.
>         >
>         > donny
>         >
>         > On 1/7/08, Tim Redfern < gumstix@eclectronics.org> wrote:
>         >         hiya, i think you need
>         >
>         >         auto usb0
>         >
>         >         just above the rest of the usb entry, to make it
>         show up on
>         >         boot.
>         >
>         >         tim
>         >
>         >
>         >         On Mon, 2008-01-07 at 10:38 +0100, Donny George
>         wrote:
>         >         > hello
>         >         > yes i did edit the file
>         >         >
>         >         > as such the part in the file just read
>         >         > iface usb0 inet dhcp
>         >         >
>         >         > AND NOT
>         >         >
>         >         >
>         >         >
>         >         > iface usb0 inet dhcp
>         >         >        pre-up /sbin/modprobe
>         g_ether;/sbin/modprobe
>         >         af_packet
>         >         >        post-down /sbin/modprobe -r g_ether
>         >         >
>         >         > so i made the changes according to the wiki. and
>         still once
>         >         i do
>         >         > ifconfig i cant see the usb 0 entry
>         >         >
>         >         > one thing that i noticed was that the mwlan0 also
>         had the
>         >         >
>         >         > iface mwlan0 inet dhcp
>         >         >         pre-up /sbin/iwconfig $IFACE mode ad-hoc
>         >         >         pre-up /sbin/iwconfig $IFACE essid
>         gumstix-today
>         >         >
>         >         >
>         >         > so in total my new file is
>         >         > # Configure Loopback
>         >         > auto lo
>         >         > iface lo inet loopback
>         >         >
>         >         > iface usb0 inet static
>         >         >         address 192.168.0.2
>         >         >         netmask 255.255.255.0
>         >         >         pre-up /sbin/modprobe
>         g_ether;/sbin/modprobe
>         >         af_packet
>         >         >         post-down /sbin/modprobe -r g_ether
>         >         >
>         >         > iface bnep0 inet dhcp
>         >         >
>         >         > auto eth0
>         >         > iface eth0 inet dhcp
>         >         >
>         >         > iface eth1 inet dhcp
>         >         >
>         >         > iface wlan0 inet dhcp
>         >         >
>         >         > auto mwlan0
>         >         > iface mwlan0 inet dhcp
>         >         >         pre-up /sbin/iwconfig $IFACE mode ad-hoc
>         >         >         pre-up /sbin/iwconfig $IFACE essid
>         gumstix-today
>         >         >
>         >         >
>         >         > kindly comment
>         >         >
>         >         > don
>         >         >
>         >         >
>         >         > On 1/4/08, Tim Redfern < gumstix@eclectronics.org>
>         wrote:
>         >         >         hi have you edited the
>         file /etc/network/interfaces
>         >         on the
>         >         >         gumstix, as
>         >         >         it says in the wiki?
>         >         >
>         >         >         tim
>         >         >
>         >         >         On Fri, 2008-01-04 at 16:39 +0100, Donny
>         George
>         >         wrote:
>         >         >         > hi
>         >         >         >
>         >         >         > this time i am succesfull with modprobe
>         usbnet. so
>         >         i assume
>         >         >         that is
>         >         >         > set up
>         >         >         >
>         >         >         >
>         >         >         > as of now i still cant find the adapter
>         entry of
>         >         usb0
>         >         >         once  i enter
>         >         >         > ifconfig in gumstix?
>         >         >         >
>         >         >         > don
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > On 1/4/08, Tim Redfern <
>         gumstix@eclectronics.org>
>         >         wrote:
>         >         >         >         hi
>         >         >         >
>         >         >         >         > and as such i can locate the
>         usbnet with
>         >         the lsmod
>         >         >         command
>         >         >         >
>         >         >         >         in which case you shouldn't have
>         to
>         >         modprobe it, i
>         >         >         think.
>         >         >         >
>         >         >         >         > the encryption says about
>         wireless
>         >         encryptions i
>         >         >         assume and
>         >         >         >         this is
>         >         >         >         > disabled
>         >         >         >
>         >         >         >         for usbnet? yes i would assume
>         it wouldnt
>         >         have an
>         >         >         impact
>         >         >         >
>         >         >         >         > but the comand modprobe usbnet
>         is the
>         >         place where
>         >         >         i am
>         >         >         >         stuck. am i
>         >         >         >         > doing some silly mistake. is
>         the correct
>         >         method to
>         >         >         enable
>         >         >         >         usb
>         >         >         >         > communication?
>         >         >         >
>         >         >         >         on my machine, usbnet doesnt
>         appear in the
>         >         list of
>         >         >         modules
>         >         >         >         until it is
>         >         >         >         started by connecting the
>         gumstix.
>         >         connecting the
>         >         >         gumstix
>         >         >         >         loads it
>         >         >         >         automatically.
>         >         >         >
>         >         >         >         but if i 'sudo modprobe usbnet'
>         before
>         >         connecting
>         >         >         the gumstix,
>         >         >         >         that will
>         >         >         >         load the module also, i can
>         verify it by
>         >         'lsmod |
>         >         >         grep usbnet'.
>         >         >         >
>         >         >         >         if you connect the gumstix and
>         type
>         >         'ifconfig', do
>         >         >         you see a
>         >         >         >         network
>         >         >         >         adapter entry called 'usb0'?
>         >         >         >
>         >         >         >         or have you tried
>         '/sbin/modprobe usbnet'?
>         >         (just a
>         >         >         guess)
>         >         >         >
>         >         >         >         you could 'find / -name
>         modprobe' also.
>         >         >         >
>         >         >         >         Tim
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         >         >         This SF.net email is sponsored
>         by:
>         >         Microsoft
>         >         >         >         Defy all challenges.
>         Microsoft(R) Visual
>         >         Studio
>         >         >         2005.
>         >         >         >
>         >         >
>         >
>         http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>         >         >         >
>         >         _______________________________________________
>         >         >         >         gumstix-users mailing list
>         >         >         >
>         gumstix-users@lists.sourceforge.net
>         >         >         >
>         >         >
>         >
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>         >         >         >
>         >         >         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         >         > This SF.net email is sponsored by:
>         Microsoft
>         >         >         > Defy all challenges. Microsoft(R) Visual
>         Studio
>         >         2005.
>         >         >         >
>         >
>         http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>         >         >         >
>         _______________________________________________
>         >         >         gumstix-users mailing list
>         >         gumstix-users@lists.sourceforge.net
>         >         >
>         >
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>         >         >
>         >         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         >         This SF.net email is sponsored by:
>         Microsoft
>         >         >         Defy all challenges. Microsoft(R) Visual
>         Studio
>         >         2005.
>         >         >
>         >
>         http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>         >         >
>         _______________________________________________
>         >         >         gumstix-users mailing list
>         >         >         gumstix-users@lists.sourceforge.net
>         >         >
>         >
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>         >         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         > This SF.net email is sponsored by: Microsoft
>         >         > Defy all challenges. Microsoft(R) Visual Studio
>         2005.
>         >         >
>         http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>         >         > _______________________________________________
>         >         gumstix-users mailing list
>         gumstix-users@lists.sourceforge.net
>         >
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>         >
>         >
>         >
>         -------------------------------------------------------------------------
>         >         This SF.net email is sponsored by: Microsoft
>         >         Defy all challenges. Microsoft(R) Visual Studio
>         2005.
>         >
>         http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>         >         _______________________________________________
>         >         gumstix-users mailing list
>         >         gumstix-users@lists.sourceforge.net
>         >
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>         >
>         >
>         -------------------------------------------------------------------------
>         > Check out the new SourceForge.net Marketplace.
>         > It's the best place to buy or sell services for
>         > just about anything Open Source.
>         >
>         http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>         > _______________________________________________
>         gumstix-users mailing list gumstix-users@lists.sourceforge.net
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>
>         -------------------------------------------------------------------------
>         Check out the new SourceForge.net Marketplace.
>         It's the best place to buy or sell services for
>         just about anything Open Source.
>         http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>         _______________________________________________
>         gumstix-users mailing list
>         gumstix-users@lists.sourceforge.net
>         https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________ gumstix-users mailing list gumstix-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gumstix-users


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 

 

NOTE: The information in this message is intended for the personal and confidential use of the designated recipient(s) named above. To the extent the recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an obligation of confidentiality, with AuthenTec, then this message and/or any attachments shall be considered confidential information and subject to the confidentiality terms of that agreement.  If the reader of this message is not the intended recipient named above, you are notified that you have received this document in error, and any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this document in error, please delete the original message and notify the sender immediately.

 

Thank you.

 

AuthenTec, Inc.  http://www.authentec.com

 

 


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users