Hi All,

Have just upgraded my gumstix 400 to the latest SF uboot...now thought i had hosed it first of all, but forgot I'd set the console to 115200.
Followed the instructions from the list...

[root@gumstix ~]# mount | grep mtd
/dev/mtdblock1 on / type jffs2 (rw,noatime)
[root@gumstix ~]# modprobe sa1100_wdt margin=1
[root@gumstix ~]# mount -o remount,ro /
[root@gumstix ~]# flash_unlock /dev/mtd0
[root@gumstix ~]# flashcp -v /tmp/u-boot.bin /dev/mtd0
While trying to open /tmp/u-boot.binm
[root@gumstix ~]# flashcp -v /tmp/u-boot.bin.r934-400MHz /dev/mtd0
Erasing blocks: 2/2 (100%)
Writing data: 141k/141k (100%)
Verifying data: 141k/141k (100%)
[root@gumstix ~]# echo > /dev/watchdog


That all apparently went ok as u-boot seems to be ok..

U-Boot 1.1.4 (Apr 10 2006 - 09:45:33)

*** Welcome to Gumstix ***

U-Boot code: A3F00000 -> A3F2369C  BSS: -> A3F58748
RAM Configuration:
Bank #0: a0000000 64 MB
Flash: 16 MB
Using default environment

SMC91C1111-0
Net:   SMC91C1111-0
Hit any key to stop autoboot:  0
GUM> \
> printenv
Unknown command '
printenv' - try 'help'
GUM> printenv
bootargs=console=ttyS0,115200n8 root=1f02 rootfstype=jffs2 reboot=cold,hard
bootcmd=icache on;setenv stderr nulldev; setenv stdout nulldev; if mmcinit && fatload mmc 0 a2000000 gumstix-factory.script; then setenv stdout serial; setenv stderr serial; echo Found gumstix-factory s
cript...; autoscr; else setenv stdout serial;setenv stderr serial;fsload && bootm; fi
bootdelay=2
baudrate=115200
ethaddr=00:0A:95:A5:47:3A
bootfile=boot/uImage
verify=no
ethact=SMC91C1111-0
stdin=serial
stdout=serial
stderr=serial
serial#=DBA8893C3EAC300C

Environment size: 535/4092 bytes

now once i run the boot command, it seems to just hang with no output after it's loaded the kernel

GUM> boot
Instruction Cache is ON
### JFFS2 loading 'boot/uImage' to 0xa2000000
Scanning JFFS2 FS: ....... done.
### JFFS2 load complete: 744372 bytes loaded to 0xa2000000
## Booting image at a2000000 ...
   Image Name:   Linux-2.6.15gum
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    744308 Bytes = 726.9 kB
   Load Address: a0008000
   Entry Point:  a0008000
OK

Starting kernel ...

Uncompressing Linux.................................................. done, booting the kernel.

Any ideas anyone?

Thanks,
Karl