I am trying to replace my filesystem on my new waysmall 200. I would like to flash from the MMC that came with my student kit. U-Boot gives:

U-Boot 1.1.4 (May 23 2006 - 12:47:17)

*** Welcome to Gumstix ***

U-Boot code: A3F00000 -> A3F2369C  BSS: -> A3F58748
RAM Configuration:
Bank #0: a0000000 64 MB
Flash:  4 MB
SMC91C1111-0
Can't overwrite "serial#"
Net:   SMC91C1111-0
Hit any key to stop autoboot:  0
GUM> mmcinit
MMC found. Card desciption is:
Manufacturer ID = 300000
HW/FW Revision = 1 1
Product Name = .000000
Serial Number = 310000
Month = 11
Year = 2006
GUM> fatls mmc 1
No Fat FS detected

According to this email <http://article.gmane.org/gmane.linux.distributions.gumstix.general/18178/match=fat+fs+detected > I need to upgrade my U-Boot version. Is this correct, or is there another fix?

I have only seen <http://article.gmane.org/gmane.linux.distributions.gumstix.general/217/match=upgrade+u+boot > as a guide to upgrade U-Boot:

# flashcp -v u- boot.bin.r48-200MHz /dev/mtd1

I have a new version of U-Boot that I created with Buildroot revision 1210. I tried usind flashcp to replace my boot loader:

# flashcp -v u-boot.bin /dev/mtd1
Erasing blocks: 1/2 (50%)
m
#

It obviously didn't work, but I didn't brick my device. What do I need to do to get my new u-boot.bin loaded?

Thanks in advance,
Sam