Hi Tim,

I'm not really sure how to interpret the schematics.. However, I did notice that the schematics are for the R791 board while I am using the R1286 board (I'm not sure if that makes any difference).

Would it be as simple as buying a stero splitter, then plugging in 2 mono mics? You mentioned connecting the gnd to the gnd.. but I'm not sure what that actually entails.

If it is as simple as just buying the stero splitter, I was wondering how I would go about accessing each mic as a separate device. For example: recording from mic1 into foo.wav, and from mic2 into bar.wav at the same time.

Thanks


On 2/28/07, timcrawford@comcast.net < timcrawford@comcast.net> wrote:
Hi Joey,

Here is the schematic:
http://pubs.gumstix.org/boards/AUDIOSTIX/PCB00012-R791/PCB00012-R791_UCB1400.png

As you can see X48 is the audio in jack with line_in_left, line_in_right, and gnd.
You will need a stereo plug and two mono jacks.
Connect the center tap of the mono jack to one of the line in on the stereo plug
Connect the gnd to gnd
Repeat for the other mono jack.

Let me know how this works out.

Tim

-------------- Original message ----------------------
From: "Joey Degges" <jdegges@gmail.com>
> Tim,
>
> How do I hook up the second mic? To the audio out port?
>
> Thanks
>
> On 2/28/07, timcrawford@comcast.net < timcrawford@comcast.net> wrote:
> >
> > Hi Joey,
> >
> > It can record in stereo, so that would imply two mics.
> >
> > Tim
> >
> > -------------- Original message ----------------------
> > From: "Joey Degges" < jdegges@gmail.com>
> > > Hello,
> > >
> > > I was wondering if it is possible to record from two separate
> > microphones
> > > using the audiostix2 board.
> > >
> > > Thanks
> >
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your
> > opinions on IT & business topics through brief surveys-and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > gumstix-users mailing list
> > gumstix-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> >


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users