I just updated the wiki page with the Verdex information.


On 5/20/07, Warren Jackson <wj@warrenjackson.com > wrote:
I think Dave Hylands is/was using 1352... so the version isn't likely the problem.  I'm using 1363 and it works fine (except for certain python modules seg faulting).

Just looking at your previous posts, the wiki page for updating the filesystem doesn't apply to verdex.  You have to first flash the filesystem ( rootfs.arm_nofpu.jffs2) then the kernel (uImage).  I have no idea if moving uImage to /boot will work. Below are my notes on flashing a Verdex:

if katinstall and katload don't work, you uboot needs updating.

kermit -l /dev/ttyS0
set carrier-watch off
set speed 115200
set file type bin
set reliable
fast
set flow-control none
set rec pack 4096
set send pack 4096
set window 5
set prefixing all
connect

## GUM> prompt
loadb a2000000

## ctrl-\ c to kermit prompt
send rootfs.arm_nofpu.jffs2
connect

## GUM>
pro on 1:0-1 && jera all && cp.b a2000000 40000 ${filesize}
loadb a2000000

## kermit prompt
send uImage
connect

## GUM>
katinstall 100000
katload 100000
bootm




On 5/20/07, Dave Touretzky <dst@cs.cmu.edu> wrote:
Is there a known good version of buildroot for the verdex?  I'm running
Craig's 270 chain, version 1352, and I can't get it to boot, even with all
default settings.

I did "make defconfig" in gumstix-root, and "make ARCH=arm defconfig" in
the buildroot/linux* directory, to be sure I had the default settings.
I deselected the bridge package because it was generating errors.
Everything else is purely the defaults.  The system compiles, but it
crashes on boot:

GUM> boot
Instruction Cache is ON
### JFFS2 loading 'boot/uImage' to 0xa2000000
Scanning JFFS2 FS: ....... done.
### JFFS2 load complete: 1167852 bytes loaded to 0xa2000000
## Booting image at a2000000 ...
   Image Name:   uImage
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1167788 Bytes =  1.1 MB
   Load Address: a0008000
   Entry Point:  a0008000
OK

Starting kernel ...

data abort
pc : [<a000823c>]    lr : [<a0008270>]
sp : a012e5e4  ip : a00080bc  fp : 00000001
r10: 10000000  r9 : 00000000  r8 : a0000100
r7 : 00000175  r6 : 69054117  r5 : a0008000  r4 : 00008000
r3 : 00004000  r2 : 00008000  r1 : 00000c1e  r0 : 00004004
Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...


U-Boot 1.1.4 (Mar  1 2007 - 17:10:55) - PXA270@600 MHz - 1321

*** Welcome to Gumstix ***

U-Boot code: A3F00000 -> A3F25850  BSS: -> A3F5AE70
RAM Configuration:
Bank #0: a0000000 128 MB
Flash: 32 MB
Using default environment

SMC91C1111-0
Net:   SMC91C1111-0
Hit any key to stop autoboot:  0



-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users