NOW we are getting somewhere.

It looks like the image that is on the NAND flash is having issues finding
things it needs, like.. busy box, and even teh scheduler.. Have you reprogrammed the NAND flash in the past?  Is this running an Image that you built yourself?

If so, it would appear that there are things missing in the build.

But according to that log, it's not your tty that's having the problem, it's the entire system in general is not completing the boot process correctly.

At this point, I would suggest trying to get a completed image that's already built for your processor, and putting it onto an MMC card and trying to boot from that to see if you can get a console log.

If that works, then you probably want to try to get that default boot image onto your NAND so that you can boot your processor without having anything else on it.

Once you get *THAT* working, my suggestion is, when you build kernel images to try, put it on MMC card first, and boot from that to verify that it works correctly, *THEN* put it onto the NAND flash and see if it boots from there.

Rick


2009/8/31 Luis Rodolfo García Carrillo <lurogaca@gmail.com>
Hi again and thanks for your answer...

Here are the messages I received whuen I make the connection through the USB console port... I can't get logged on that way either. After the las line, nothing happens....

Any Ideas????

Thanks for your answers....

----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
Texas Instruments X-Loader 1.4.2 (Mar 27 2009 - 08:51:34)
Loading u-boot.bin from nand
Skipped bad block at 0xa0000


U-Boot 2009.03 (Mar 27 2009 - 08:52:42)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
Gumstix Overo board + LPDDR/NAND
DRAM:  256 MB
NAND:  256 MiB
*** Warning - bad CRC or NAND, using default environment

In:    serial
Out:   serial
Err:   serial
Die ID #
67fc00040000000004032d460c021009
Hit any key to stop autoboot:  0
No MMC card found
Booting from nand ...

NAND read: device 0 offset 0x280000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Angstrom/2.6.29-rcfinal+r0+git90
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2723228 Bytes =  2.6 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................................................................... done, booting the kernel.
Linux version 2.6.29-omap1 (sakoman@otto) (gcc version 4.3.1 (GCC) ) #1 Fri Mar 27 08:57:46 PDT 2009
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Gumstix Overo
omapfb_early_vram, 12582912, 0x0
Memory policy: ECC disabled, Data cache writeback
OMAP3430 ES3.1
SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
Reserving 12582912 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS2,115200n8 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
Clocking rate (Crystal/DPLL/ARM core): 26.0/331/500 MHz
GPMC revision 5.0
IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP34xx GPIO hardware version 2.5
PID hash table entries: 1024 (order: 10, 4096 bytes)
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB 128MB = 256MB total
Memory: 241408KB available (4460K code, 531K data, 940K init)
Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 764 bytes
regulator: core version 0.5
NET: Registered protocol family 16
Found NAND on CS0
Registering NAND on CS0
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
OMAP DSS rev 2.0
OMAP DISPC rev 3.0
OMAP VENC rev 2
i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
twl4030: PIH (irq 7) chaining IRQs 368..375
twl4030: power (irq 373) chaining IRQs 376..383
twl4030: gpio (irq 368) chaining IRQs 384..401
regulator: VMMC1: 1850 <--> 3150 mV normal standby
regulator: VUSB1V5: 1500 <--> 0 mV normal standby
regulator: VUSB1V8: 1800 <--> 0 mV normal standby
regulator: VUSB3V1: 3100 <--> 0 mV normal standby
i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
SCSI subsystem initialized
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
musb_hdrc: version 6.0, musb-dma, host, debug=0
musb_hdrc: USB Host mode controller at d80ab000 using DMA, IRQ 92
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 2.6.29-omap1 musb-hcd
usb usb1: SerialNumber: musb_hdrc
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
msgmni has been set to 471
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
console [ttyS2] enabled
brd: module loaded
loop: module loaded
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
i2c /dev entries driver
Driver 'sd' needs updating - please use bus_type methods
omap2-nand driver initializing
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
cmdlinepart partition parsing not available
Creating 5 MTD partitions on "omap2-nand":
0x000000000000-0x000000080000 : "xloader"
0x000000080000-0x000000240000 : "uboot"
0x000000240000-0x000000280000 : "uboot environment"
0x000000280000-0x000000680000 : "linux"
0x000000680000-0x000010000000 : "rootfs"
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OMAP-EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-omap1 ehci_hcd
usb usb2: SerialNumber: ehci-omap.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
mice: PS/2 mouse device common for all mice
twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
twl4030_rtc twl4030_rtc: Power up reset detected.
twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC.
OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
regulator: Unable to get requested regulator: vmmc_aux
mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
regulator: Unable to get requested regulator: vmmc
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
usbcore: registered new interface driver snd-usb-audio
No device for DAI twl4030
No device for DAI omap-mcbsp-dai-0
No device for DAI omap-mcbsp-dai-1
No device for DAI omap-mcbsp-dai-2
No device for DAI omap-mcbsp-dai-3
No device for DAI omap-mcbsp-dai-4
overo SoC init
TWL4030 Audio Codec init
asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
ALSA device list:
  #0: overo (twl4030)
oprofile: using arm/armv7
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ThumbEE CPU extension supported.
Power Management for TI OMAP3.
SmartReflex driver initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
mmc0: mmc_rescan - card ocr from io_op=0x00000000, err = -110
fbcvt: 1024x768@60: CVT Name - .786M3-R
Console: switching to colour frame buffer device 128x48
clock: clksel_round_rate_div: dpll4_m4_ck target_rate 86400000
clock: new_div = 5, new_rate = 86400000
twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
VFS: Mounted root (jffs2 filesystem) on device 31:4.
Freeing init memory: 940K
mmc1: mmc_rescan - card ocr from io_op=0x90ff8000, err = 0
mmc1: new SDIO card at address 0001
INIT: version 2.86 booting
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
grep: /proc/cmdline: No such file or directory
/etc/rcS.d/S01psplash: line 16: can't open /proc/cpuinfo: no such file
/etc/rcS.d/S01psplash: line 16: awk: not found
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
/etc/rcS.d/S01psplash: line 21: /usr/bin/psplash: not found
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
grep: /proc/filesystems: No such file or directory
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
grep: /proc/mounts: No such file or directory
grep: /proc/mounts: No such file or directory
/etc/rcS.d/S10checkroot: line 199: awk: not found
Remounting root file system...
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
mount: error while loading shared libraries: libuuid.so.1: cannot open shared object file: No such file or directory
/etc/init.d/rc: /etc/rcS.d/S35mountall.sh: line 17: logger: not found
/etc/init.d/rc: /etc/rcS.d/S35mountall.sh: line 58: awk: not found
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 171: sort: not found
grep: /proc/filesystems: No such file or directory
ALSA: Restoring mixer settings...
Setting up IP spoofing protection: FAILED.
Configuring network interfaces... NET: Registered protocol family 10
ifup: can't open '/var/run/ifstate': No such file or directory
done.
Starting portmap daemon: portmap.
grep: /proc/mounts: No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
/etc/init.d/rc: /etc/rcS.d/S55bootmisc.sh: line 79: awk: not found
/etc/init.d/rc: /etc/rcS.d/S55bootmisc.sh: line 79: expr: not found
sh: 1: unknown operand
INIT: Entering runlevel: 5
Starting advanced power management daemon: start-stop-daemon: cannot start /usr/sbin/apmd: No such file or directory
(failed.)
Starting syslogd/klogd: done
Starting Connection Manager
/etc/rc5.d/S22connman: line 40: connmand: not found
/etc/rc5.d/S23bluetooth: line 26: which: not found
/etc/rc5.d/S23bluetooth: line 27: which: not found
/etc/rc5.d/S23bluetooth: line 28: which: not found
/etc/rc5.d/S23bluetooth: line 29: which: not found
/etc/rc5.d/S23bluetooth: line 30: which: not found
/etc/rc5.d/S23bluetooth: line 31: which: not found
/etc/rc5.d/S23bluetooth: line 32: which: not found
Starting Bluetooth subsystem:
.
/etc/rc5.d/S50usb-gadget: line 15: usb-gadget: not found
ps: invalid option -- a
/etc/rc5.d/S81cups: line 176: awk: not found
BusyBox v1.13.2 (2009-03-09 11:27:58 PDT) multi-call binary

Usage: ps

Report process status

Options:
    w    Wide output

/etc/rc5.d/S81cups: line 232: /usr/sbin/cupsd: not found
cups: unable to start scheduler.
Starting GPE display manager: gpe-dm
/etc/rc5.d/S99gpe-dm: line 22: /usr/bin/gpe-dm: not found


----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------












2009/8/29 richard dorfner <rdorfner@gmail.com>

AHHHhhhh.. ookay, well.. you MIGHT try connecting through the USB console port first and seeing if you can get logged on that way.

It sounds like there might be some configuration issue with the driver or the getty login for the screen.. or.. SOMETHING along those lines. 

Go to the gumstix.net developer's page, then documentation, then overo and to the getting started page where it outlines using kermit from a linux system to connect to the Overo and getting logged in.

Rick


2009/8/29 Luis Rodolfo García Carrillo <lurogaca@gmail.com>

Hi, and thanks for your answers....

I don't know if I'm doing something wrong...

What I do is:
Connect a screen, a keyboard and a mouse to the Gumstix Overo Fire... after power on, I see the inizialitation and the logos in the screen, finally the login... then, the problem... "Unable to determine your tty name"...

Am I doing wrong trying to use directly the Gumstix? Should I connect it to another system???

Thanks for your help....




2009/8/28 richard dorfner <rdorfner@gmail.com>

Huh.. interesting.. let's see who spits that out..

 find . -name \*.c -print -exec grep "Unable to determine your tty name" {} \; > ../foo

emacs ./foo

Yields this line...

./tmp/work/armv7a-angstrom-linux-gnueabi/tinylogin-1.4-r6/tinylogin-1.4/login.c

    "Unable to determine your tty name."

sooo..

emacs ./tmp/work/armv7a-angstrom-linux-gnueabi/tinylogin-1.4-r6/tinylogin-1.4/login.c

Yields...
#define    NO_TTY \

    "Unable to determine your tty name."

and...

    if (ut) {
        utent = *ut;
    } else {
        if (picky) {
            puts(NO_UTENT);
            exit(1);
        }
        line = ttyname(0);
        if (!line) {
            puts(NO_TTY);    <<------------------
            exit(1);
        }
   


WHich brings us to the question what ttyname does, well, it , according to man ttyname  returns teh device name that the login is trying to occur on and a null string if the port is unknown.

WHich brings the next question.. why isn't this working for you?  It SHOULD just work out of the box, to get a login, so something with your system is different than "out of the box."  have you rebuilt the kernel? are you trying to do this over a serial port? and ethernet connection? ...???

I think you need ot give us more details. 

Which cpu? What system are you connecting from? over what media? what is the kernel configuration you are using on the target you are trying to log in on? etc etc.  Might be able to get more betterer reply then.

Rick

2009/8/28 Luis Rodolfo García Carrillo <lurogaca@gmail.com>

Hi everyone...

Still trying to acces to my overo fire, without succes... here are the messages i received from the gumstix after I type "root" or "gumstix"

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Please wait: booting...
Angstrom
The Angstrom Distribution overo tty1
Angstrom 2009.X-test-20090309 overo tty1
overo login: root

Unable to determine your tty name.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Any ideas????

Thanks for your help...







2009/8/26 richard dorfner <rdorfner@gmail.com>
When you say nothing happens, do you mean like NOTHING? as in it acts as if it doesn't even see your login attempt?
Or does it then ask for a password and etc.?

Rick



2009/8/26 Luis Rodolfo García Carrillo <lurogaca@gmail.com>
Thanks for your answer,

Yes, I have tried "root" also... nothing happens...

Any other ideas???



2009/8/26 Wai Leong Seethoo <seethoowl@gmail.com>

root, in small letters, not ROOT, works for me. No password.

2009/8/26 Luis Rodolfo García Carrillo <lurogaca@gmail.com>
Hi,

Anyone knows the LOGIN for OVERO FIRE????
I have tried ROOT, and many other things, but I cant find the correct LOGIN...
Any ideas???

Thanks...

--
GARCIA CARRILLO Luis Rodolfo

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
GARCIA CARRILLO Luis Rodolfo

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Say you can or say you can't, either way you will be right.
Computers are like old testament gods: Lots of rules and no mercy.

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
GARCIA CARRILLO Luis Rodolfo

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Say you can or say you can't, either way you will be right.
Computers are like old testament gods: Lots of rules and no mercy.

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
GARCIA CARRILLO Luis Rodolfo

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Say you can or say you can't, either way you will be right.
Computers are like old testament gods: Lots of rules and no mercy.

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
GARCIA CARRILLO Luis Rodolfo



--
Say you can or say you can't, either way you will be right.
Computers are like old testament gods: Lots of rules and no mercy.