I have a verdex pro connected to my home machine via a serial connection.
 
I'd like to connect the verdex to the network.  I have a miniB to femaleA adapter and plugged in a USB network lan adapter.  When I did I got the message:
 
root@gumstix-custom-verdex:/dev$ usb 1-2: new full speed USB device using pxa27x-ohci and address 4
usb 1-2: configuration #1 chosen from 1 choice
The command lsusb shows:
Bus 1 Device 3: ID 0a46:9601 Davicom Semiconductor, Inc.
I think that is good and I presume that means I have a recognized chipset.  I *think* I need to install a kernal module and make a change to /etc/network/interfaces but I'm lost at this point and I've been searching the gumstix wiki for hours.
 
I don't see and usb devices in /dev
root@gumstix-custom-verdex:/dev$ ls -l | grep -i usb
crw-rw-r--    1 root     root     189,   0 Jan  1 00:00 usbdev1.1
crw-rw----    1 root     root     254,   0 Jan  1 00:00 usbdev1.1_ep00
crw-rw----    1 root     root     254,   1 Jan  1 00:00 usbdev1.1_ep81
crw-rw-r--    1 root     root     189,   3 Jan  1 01:13 usbdev1.4
crw-rw----    1 root     root     254,   2 Jan  1 01:13 usbdev1.4_ep00
crw-rw----    1 root     root     254,   4 Jan  1 01:13 usbdev1.4_ep02
crw-rw----    1 root     root     254,   3 Jan  1 01:13 usbdev1.4_ep81
crw-rw----    1 root     root     254,   5 Jan  1 01:13 usbdev1.4_ep83
 
I'll take any help or pointers to documentation at this point.  I found lots of places that document setting up a usbnet but I think that would require my verdex pro to be a usb device as opposed to being in host mode and I thought the verdex pro did not do that.
 
Any help is appreciated,
 
Donny in Tallahassee