Gordon,

I'm open to either option.  Collecting input from the list is a good starting point.

Let see what people are looking for and take it from there.  If there seems to be general consensus on a feature set then it certainly makes sense for Gumstix to do it.

Steve


On 2/27/07, Gordon Kruberg <gordon@gumstix.com> wrote:
We have been talking about this internally and would be happy to do the
board/boards: our internal products have been designated: breadstix
(more-or-less simple breadboard design) dipstix (DIP carrier), and
protostix (a more sophisticated set of traces and interfaces than
thebreadstix)

Would you like to work with us to spec and we can build, or would you
rather carry it out yourself?
Could I suggest doing it with the mailing list and incorporating the
list's feedback, much the way we did with robostix?


Gordon



> A have a couple of projects in the planning phase that involve adding
> custom hw to the gumstix via the 60 pin Hirose connector.
>
> In the past I've prototyped using a tweener, breakout gs, and flying
> blue wires to a prototyping board.  It works, but it's not pretty and
> the physical stability leaves much to be desired!
>
> I'm going to bite the bullet and do a somewhat general purpose 60 pin
> prototyping PCB.
>
> At a minimum it will combine the functionality of the tweener and the
> breakout gs and include a prototyping area (.1" grid of through holes).
>
> Before I proceed though, I thought I'd check to see if anyone on the
> list knows of the existence of something like this.
>
> If not, feature suggestions are welcome.  Perhaps I can find a way to
> make the boards available to others.
>
> Steve
>
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> ------------------------------------------------------------------------
>
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users