Hi,

I've tried miscelenous things to start up my bluetooth but nothing worked. I've downgraded the current linux-image version r773 to r549 where the bluetooth device is started after booting sequence and everything work fine.

I wonder what changes are made in newest releases that stops my ROK bluetooth starting.

GL



Grzegorz Latarowski wrote:
Hi,

I've got exact same problem. Everything seems to work fine while booting

    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI UART driver ver 2.1
    Bluetooth: HCI H4 protocol initialized
     /dev/ttyS3 hcidBluetooth: L2CAP ver 2.7
    Bluetooth: L2CAP socket layer initialized
     sdpdBluetooth: RFCOMM ver 1.5
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
     rfcommBluetooth: BNEP (Ethernet Emulation) ver 1.2
    Bluetooth: BNEP filters: protocol multicast
     pand.


After checkout bluetooth modules

    # hciconfig
    hci0:   Type: UART
            BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
            DOWN
            RX bytes:0 acl:0 sco:0 events:0 errors:0
            TX bytes:4 acl:0 sco:0 commands:1 errors:0


when I tried to start up bluetooth module I receive a connection timeout

    # hciconfig hci0 up
    Can't init device hci0: Connection timed out (110)


I've got a basix 400-bt bought last April. Everything worked fine but something pushed me to reflash to the newest linux image and everything crashed. Bluetooth module on my waysmall is Infineon ROK 104 001/2 R1A.

Best regards,
Grzegorz Latarowski





David Scanlan wrote:
Craig, which chip on the GumStix, is the Bluetooth module?

None of them have "PBA 313 07/1 or ROK104 001/2" written on them.


-----Original Message-----
From: gumstix-users-admin@lists.sourceforge.net
[mailto:gumstix-users-admin@lists.sourceforge.net] On Behalf Of Craig Hughes
Sent: 21 February 2006 19:18
To: gumstix-users@lists.sourceforge.net
Subject: Re: [Gumstix-users] Bluetooth issue

David, what does the bluetooth module say on it?  PBA 313 07/1 or  
ROK104 001/2?

C

On Feb 21, 2006, at 6:01 AM, David Scanlan wrote:

  
OK, bit of an update.
I have re-flashed with the latest sf stuff, and that all went fine  
but I now
get different errors still about the Bluetooth and am starting to  
think it
is a hardware problem! Heres some of the startup blurb which may be  
of use:

Starting 32kHz clock.....Settled
Set (AF1,out,set) via /proc/gpio/GPIO12
Starting Bluetooth subsystem:Trying baud rate 57600...
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
No response after reset
No response from BT module
Trying baud rate 115200...
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Starting network...
udhcpc (v0.9.9-pre) started

and now when I type hciconfig -a this is what I get :(

# hciconfig -a
Can't open HCI socket.: Address family not supported by protocol

Help please...my projects starting to fall behind bigtime!

Dave

-----Original Message-----
From: gumstix-users-admin@lists.sourceforge.net
[mailto:gumstix-users-admin@lists.sourceforge.net] On Behalf Of David
Scanlan
Sent: 21 February 2006 09:53
To: gumstix-users@lists.sourceforge.net
Subject: RE: [Gumstix-users] Bluetooth issue

# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)

That's the error I'm getting...I'm assuming I don't have to do  
anything
prior to running this on the gumstix or should it already be up?

The output from dmesg seems to be ok I think:

Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
IRQ58 (GPIO35): rising falling edges
pxa2xx_udc: version 14-Dec-2003
.
.
.
.
usb0: Ethernet Gadget, version: Equinox 2004
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in- 
bulk
usb0: MAC 0a:00:2a:42:33:61
usb0: HOST MAC 0a:00:2a:42:33:62
usb0: RNDIS ready
NET: Registered protocol family 17
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC  
Ethernet
Subset

Any suggestions? Any other ways I could test this?  Cheers

Dave

-----Original Message-----
From: gumstix-users-admin@lists.sourceforge.net
[mailto:gumstix-users-admin@lists.sourceforge.net] On Behalf Of  
Paul Coldrey
Sent: 21 February 2006 03:38
To: gumstix-users@lists.sourceforge.net
Subject: Re: [Gumstix-users] Bluetooth issue

What is the error message?

David Scanlan wrote:
    
I am having this exact problem also.  Do you have a solution yet?

I am using the original image which it was shipped with quite  
recently
(2.6.11gum) and have tried changing the baud rates as suggested in  
another
post to no avail.  Should hci0 be up automatically after boot?   
Cheers

Dave

-----Original Message-----
From: gumstix-users-admin@lists.sourceforge.net
[mailto:gumstix-users-admin@lists.sourceforge.net] On Behalf Of Dick
      
Davies
    
Sent: 07 February 2006 21:45
To: gumstix-users@lists.sourceforge.net
Subject: Re: [Gumstix-users] Bluetooth issue

On 07/02/06, Braden Huber <huberbr@yahoo.com> wrote:


      
When I do hciconfig -a the device shows up but it is in DOWN status.
        
Then
    
if I

      
do 'hciconfig hci0 up' it times out and gives an error message!

        
Throw us a bone ? :)

--
Rasputin :: Jack of All Trades - Master of Nuns
http://number9.hellooperator.net/


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through  
log
      
files
    
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD  
SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users



      
-- 
Paul Coldrey
http://www.ensigma.com.au/



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through  
log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD  
SPLUNK!
http://sel.as-us.falkag.net/sel? 
cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date:  
2/17/2006




-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through  
log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD  
SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.12/265 - Release Date:  
2/20/2006




-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through  
log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD  
SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users
    



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users