Much appreciated !

Also, if you know of an image where the touchscreen works, i'd be willing to try it as well.

Thanks,
Wade

--- On Mon, 9/13/10, Thomas Epperson <thomas.epperson@gmail.com> wrote:

From: Thomas Epperson <thomas.epperson@gmail.com>
Subject: Re: [Gumstix-users] Verdex Pro Samsung 4.3" LCD
To: "General mailing list for gumstix users." <gumstix-users@lists.sourceforge.net>
Date: Monday, September 13, 2010, 2:05 PM

Hmm, now that I think of it, I can't remember if I actually had my touchscreen connected for that boot. I will have to hook it up when I get home and verify.

On Mon, Sep 13, 2010 at 12:49 PM, Wade Cullison <wcullison@yahoo.com> wrote:
Hi Thomas,

Mine looks very similiar, with no obvious differences as shown below.

Wade

====================

U-Boot 1.2.0 (May 10 2008 - 21:22:03) - PXA270@600 MHz - 1604

*** Welcome to Gumstix ***

DRAM:  128 MB
Flash: 32 MB
Using default environment

Hit any key to stop autoboot:  0 
Instruction Cache is ON
Copying kernel to 0xa2000000 from 0x01f00000 (length 0x00100000)...done
## Booting image at a2000000 ...
   Image Name:   Angstrom/2.6.21/gumstix-custom-v
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1030052 Bytes = 1005.9 kB
   Load Address: a0008000
   Entry Point:  a0008000
OK

Starting kernel ...

Linux version 2.6.21 (wade@linuxbox) (gcc version 4.1.2) #1 Tue Aug 24 14:03:07 EDT 2010
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
Machine: The Gumstix Platform
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 624.00MHz (*3.0, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz 
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 32512
Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2 reboot=cold,hard
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127744KB available (1808K code, 196K data, 148K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
NET: Registered protocol family 2
Time: pxa_timer clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x24
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Using static partitions on Gumstix Flash ROM
Creating 3 MTD partitions on "Gumstix Flash ROM":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x01f00000 : "RootFS"
0x01f00000-0x02000000 : "Kernel"
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
XScale iWMMXt coprocessor detected.
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 148K
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
Synthesizing the initial hotplug events
Remounting root file system...
gumstix_smc91x_init: smc91x chip not found, returning -ENXIO
smc91x: Unknown symbol gumstix_smc91x_load
Invalid chip endian 0x080
smc911x: not found (-19).
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Not netCF-vx board: using newer GPIO configuration
CPLD responded with: ff
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
root: mount: special device /dev/hda1 does not exist
root: mount: special device /dev/mmcblk0p1 does not exist
root: mount: special device /dev/sda1 does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... SIOCGIFFLAGS: No such device
eth0      No such device

udhcpc (v1.2.1) started
udhcpc[573]: udhcpc (v1.2.1) started
SIOCGIFINDEX failed!: No such device
udhcpc[573]: SIOCGIFINDEX failed!: No such device
cfio: module license 'unspecified' taints kernel.
Before register driver
After register driver
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; No such device.
Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan0 ; No such device.
SIOCGIFFLAGS: No such device
wlan0     No such device

udhcpc (v1.2.1) started
udhcpc[613]: udhcpc (v1.2.1) started
SIOCGIFINDEX failed!: No such device
udhcpc[613]: SIOCGIFINDEX failed!: No such device
done.
Nothing to be done
INIT: Entering runlevel: 5
Starting Dropbear SSH server: dropbear.
Starting system message bus: dbus.
Starting syslogd/klogd: done
Starting 32kHz clock...Settled
Starting Bluetooth subsystem:
Trying baud rate 921600...
No response after reset
No response from BT module
Trying baud rate 921600...
No response after reset
No response from BT module
Trying baud rate 115200...
No response after reset
No response from BT module
Trying baud rate 57600...
No response after reset
No response from BT module
Can't initialize device: Success
ALSA: loading sound modules...
ASoC version 0.13.0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> pxa2xx-ac97 mapping ok
pxa2xx_ac97_cold_reset: cold reset timeout (GSR=0x0)
pxa2xx_ac97_read: read error (ac97_reg=7c GSR=0x444)
pxa2xx_ac97_read: read error (ac97_reg=7e GSR=0x444)
AC'97 0 access is not valid [0xffffffff], removing mixer.
soc-audio: probe of soc-audio failed with error -5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1329: No soundcards found...
Starting bonjour: 
Starting i2c...
tsc2003 i2c touch screen controller
i2c: error: timeout
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
i2c: ICR: 000007e9 ISR: 00000004
i2c: log: 
tsc2003_i2c_detect: probing address 0x48
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-0: i2c_pxa: timeout waiting for bus free
i2c: error: exhausted retries
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
i2c: ICR: 000007e9 ISR: 00000004
i2c: log: 
I2C: i2c-0: PXA I2C adapter
tsc2003 i2c touch screen controller
tsc2003_i2c_detect: probing address 0x48
i2c: error: timeout
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 1
i2c: ICR: 000017ee ISR: 00000005
i2c: log: [00000045:000017e8] [00000085:000017ee] 
I2C: i2c-1: PXA I2C adapter
i2c /dev entries driver
Starting Xserver


OpenEmbedded Linux gumstix-custom-verdex ttyS0

Angstrom 2007.9-test-20100824 gumstix-custom-verdex ttyS0

gumstix-custom-verdex login: Extended Input Devices not yet supported. Impelement it at line 637 in kinput.c
                                                                                                            Failed to open TSLib device, tried /dev/input/touchscreen0 /dev/ts /dev/touchscreen/0 .
                                                                                      D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-yFSFYUb9LG,guid=d5552435477b1d1e0129d40000000056


--- On Mon, 9/13/10, Thomas Epperson <thomas.epperson@gmail.com> wrote:

From: Thomas Epperson <thomas.epperson@gmail.com>
Subject: Re: [Gumstix-users] Verdex Pro Samsung 4.3" LCD
To: "General mailing list for gumstix users." <gumstix-users@lists.sourceforge.net>
Date: Monday, September 13, 2010, 1:27 PM


Take a look at the serial output from my board with a working touchscreen.
http://pastebin.com/jDqhvkHf
The i2c stuff for the touchscreen starts at line 133.

On Mon, Sep 13, 2010 at 11:54 AM, Wade Cullison <wcullison@yahoo.com> wrote:
Hi Thomas,

Thanks for replying !!!

The LCD displays an X in the upper left hand corner, but does not receive input (i.e. touchscreen doesn't work).  Can't get past what appears to be the touchscreen calibration.

Thanks,
Wade

--- On Mon, 9/13/10, Thomas Epperson <thomas.epperson@gmail.com> wrote:

From: Thomas Epperson <thomas.epperson@gmail.com>
Subject: Re: [Gumstix-users] Verdex Pro Samsung 4.3" LCD
To: "General mailing list for gumstix users." <gumstix-users@lists.sourceforge.net>
Date: Monday, September 13, 2010, 12:41 PM


On my setup I get the Extended devices message, however my touchscreen (4.3" samsung lcd with 16-bit console board) works fine. What portions of the hardware isn't working? Is it the whole lcd or just the touchscreen.

On Mon, Sep 13, 2010 at 11:22 AM, Wade Cullison <wcullison@yahoo.com> wrote:
Hello,

I have a Verdex Pro XL6P device with a Samsung 4.3" LCD.  Using the pre-build "gumstix-x11-image" as well as my custom build, I get the following error after booting up the gumstix.  I have scoured the net and tried looking at the mail list.  I have found a couple other users with the same problem, but no answer other than a possible hardware failure on the LCD/touchscreen device.

Any advice?

Thanks,
Wade


gumstix-custom-verdex login: Extended Input Devices not yet supported. Impelement it at line 637 in kinput.c
                            D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-j3wEVz5rjB,guid=8234e6b61ecebcb6477e10000000004e

OpenEmbedded Linux gumstix-custom-verdex ttyS0

Angstrom 2007.9-test-20100824 gumstix-custom-verdex ttyS0


------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Thomas Epperson
Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life. - Terry Pratchett.

-----Inline Attachment Follows-----


------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

-----Inline Attachment Follows-----


_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Thomas Epperson
Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life. - Terry Pratchett.

-----Inline Attachment Follows-----

------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

-----Inline Attachment Follows-----

_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--
Thomas Epperson
Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life. - Terry Pratchett.

-----Inline Attachment Follows-----

------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev

-----Inline Attachment Follows-----

_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users