I'm trying to mount a CF harddrive.  It is detected during boot and drivers loaded.
 
 
Dec 31 16:00:35 GS400XM user.notice kernel: pccard: PCMCIA card inserted into slot 0
Dec 31 16:00:35 GS400XM user.notice kernel: pcmcia: registering new device pcmcia0.0
Dec 31 16:00:35 GS400XM user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Dec 31 16:00:35 GS400XM user.info kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Dec 31 16:00:36 GS400XM user.debug kernel: Probing IDE interface ide0...
Dec 31 16:00:36 GS400XM user.info kernel: pxa2xx_udc: version 4-May-2005
Dec 31 16:00:36 GS400XM user.warn kernel: hda: HMS360404D5CF00, CFA DISK drive
Dec 31 16:00:36 GS400XM user.warn kernel: ide0 at 0xc4860000-0xc4860007,0xc486000e on irq 49
Dec 31 16:00:36 GS400XM user.info kernel: ide-cs: hda: Vpp = 0.0
Dec 31 16:00:36 GS400XM user.info kernel: usb0: Ethernet Gadget, version: May Day 2005
Dec 31 16:00:36 GS400XM user.info kernel: usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
Dec 31 16:00:36 GS400XM user.info kernel: usb0: MAC ea:3a:10:c4:4c:e1
Dec 31 16:00:36 GS400XM user.info kernel: usb0: HOST MAC ea:3a:10:c4:4c:e2
Dec 31 16:00:36 GS400XM user.info kernel: usb0: RNDIS ready
Dec 31 16:00:36 GS400XM user.info kernel: NET: Registered protocol family 17
Dec 31 16:00:36 GS400XM user.warn kernel: smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
Dec 31 16:00:36 GS400XM user.warn kernel: eth0: SMC91C11xFD (rev 1) at c4854300 IRQ 59 DMA 8 [nowait]
Dec 31 16:00:36 GS400XM user.warn kernel: eth0: Ethernet addr: ea:3a:10:c4:4c:d1
Dec 31 16:00:36 GS400XM user.debug kernel: eth0: PHY LAN83C183 (LAN91C111 Internal)
Dec 31 16:00:36 GS400XM user.info kernel: eth0: link down
Dec 31 16:00:36 GS400XM user.warn kernel: cfio: module license 'unspecified' taints kernel.
Dec 31 16:00:36 GS400XM user.warn kernel: Before register driver
Dec 31 16:00:36 GS400XM user.warn kernel: After register driver
 
# ls /dev
console    log        mtd1       null       random     ttyS1      zero
full       mem        mtd1ro     port       shm        ttyS2
kmem       mtd0       mtdblock0  ptmx       tty        ttyS3
kmsg       mtd0ro     mtdblock1  pts        ttyS0      urandom
As you can see no device is created in /dev for the harddrive.  This worked on an older buildroot.  But isn't on v1083.
 
Any help is appreciated!  thanks!
 
Dan