HI...
With my tool chain, CPU is getting reset with any new compiled flash image.
It is having problem in starting kernel...
Where as if original one is loaded it works!!!!!!!
Where lies the problem ????
here is the data displayed ..........


U-Boot 1.1.4 (Nov  6 2006 - 11:20:03) - 400 MHz - 1161

*** Welcome to Gumstix ***

U-Boot code: A3F00000 -> A3F25DE4  BSS: -> A3F5AF00
RAM Configuration:
Bank #0: a0000000 64 MB
Flash: 16 MB
Using default environment

SMC91C1111-0
Net:   SMC91C1111-0
Hit any key to stop autoboot:  0
GUM> boot
Instruction Cache is ON
### JFFS2 loading 'boot/uImage' to 0xa2000000
Scanning JFFS2 FS: ..... done.
### JFFS2 load complete: 805120 bytes loaded to 0xa2000000
## Booting image at a2000000 ...
   Image Name:   uImage
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    805056 Bytes = 786.2 kB
   Load Address: a0008000
   Entry Point:  a0008000
OK

Starting kernel ...

data abort
pc : [<a000823c>]    lr : [<a0008270>]
sp : a00d5cf8  ip : a00080bc  fp : 00000001
r10: 10000000  r9 : 00000000  r8 : a0000100
r7 : 00000175  r6 : 69052d06  r5 : a0008000  r4 : 00008000
r3 : 00004000  r2 : 00008000  r1 : 00000c1e  r0 : 00004004
Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...