Larry,

with
# vi /etc/network/interfaces
you can change the eth0 lines to something like:

auto eth0
iface eth0 inet static
        address 192.168.10.99
        netmask 255.255.255.0
        gateway 192.168.10.1

and with
# /etc/init.d/S40network restart

you should get the lights going.


Hope this helps.

----- Original Message ----
From: Larry Stewart-Zerba <larrygsz@gmail.com>
To: gumstix-users@lists.sourceforge.net
Sent: Wednesday, June 6, 2007 5:01:53 AM
Subject: [Gumstix-users] Problems with netstix 400xm-cf ethernet.

Hello,

I recently purchased a netstix 400xm-cf, and I have not had any luck in getting it to work. When the netstix is powered up and connected to my router, no activity (the leds on the router are not lit up) shows up on the router for the netstix. I have also tried setting up a DHCP server on my linux box with debug enable, then power up the the netstix, but there was no request from the device for IP. Any suggestions are welcomed.

Cheers
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users



Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains.