Hi,
Win 7 64bit, GPSBabel 1.4.4
I have a file created by Arknav K-18U in NMEA format that I want to convert to csv. I am testing with the GUI, but eventually would like to use the command line. 
The problem is that I only get the lat-long but nothing else. I would like to get all the info available in the original file (time, altitude, no. of satellites, etc)

Here are the first few lines of the original file:
$GPRMC,052203.97,A,3239.58702,N,03506.37728,E,0.726,357.13,030912,,,A*65
1577049838 0000003198
Mark #00002
$GPRMC,052208.00,A,3239.58757,N,03506.37655,E,0.491,339.55,030912,,,A*6E
3198057423 0000003198
$GPGGA,052208.00,3239.58757,N,03506.37655,E,1,03,2.53,208.6,M,18.5,M,,*57
$GPRMC,052209.00,A,3239.58734,N,03506.37692,E,0.798,329.77,030912,,,A*6A
1067383374 0000003198
$GPGGA,052209.00,3239.58734,N,03506.37692,E,1,03,2.53,208.6,M,18.5,M,,*58
$GPRMC,052210.00,A,3239.58708,N,03506.37689,E,0.628,322.39,030912,,,A*6C
1056922366 0000003198
$GPGGA,052210.00,3239.58708,N,03506.37689,E,1,03,2.53,208.6,M,18.5,M,,*55
$GPRMC,052211.00,A,3239.58795,N,03506.37649,E,0.280,317.07,030912,,,A*68


This is the command issued by the GPSBabel:


gpsbabel -w -i nmea,gprmc=1,gpgga=1,gpvtg=1,gpgsa=1,date=20120903,get_posn=0,append_positioning=0,gisteq=0,ignore_fix=1 -f D:/Data/120903.txt -o csv,snwhite=0,snupper=0,snunique=0,prefer_shortnames=0,datum=WGS 84 -F D:/Data/120903.csv

Translation successful


This is the output:

32.65978, 35.10629, 

32.65979, 35.10628, 

32.65979, 35.10628, 

32.65979, 35.10628, 

32.65978, 35.10628, 

32.65980, 35.10627, 

32.65981, 35.10626, 



Thanks,
Ilik